Fluke® I30 AC/DC Current Clamp, 20 A/300 VAC/VDC, 20 kHz
Clamp Meters
500991
MFG #: I30
Fluke®
646.99000
/ ea
The i30 current clamp is based on Hall Effect technology for use in measurement of both DC and AC current. The i30 may be used in conjunction with multimeters, recorders and other suitable recording instruments for accurate non-intrusive current measurement.
- http://www.fluke.com(Seller Home Page URL)
- http://www.fluke.com/(Seller Home Page URL)
- Spec Sheet URL - 11095_8L6GKNR5MOIUDXSW.pdf(Spec Sheet URL)
- Install Instructions URL - ID-INS-H3.pdf(Install Instructions URL)
- Owners Manual URL - 11095_I57LKVQSOJBC2Z0A.pdf(Owners Manual URL)
- Owners Manual URL - i4101010isdut0300.pdf(Owners Manual URL)
- Spec Sheet URL - 2747126_6001_ENG_B_W.PDF(Spec Sheet URL)
- Applications
- Features
| Measure Current |
| 30 mA to 30 a DC, 30 mA to 20 A AC RMS specified current range |
| 5 mA to 30 a DC, 30 mA to 20 A AC RMS usable current range |
| 1.4 in crest factor |
| 100 mV/A output sensitivity |
| +/-1 mA resolution |
| >10 kOhm and <=100 pF load impedance |
| +/-1% relative to center reading conductor position sensitivity |
| DC to 20 kHz (-0.5 dB) frequency |
| +/-0.01% of reading/deg C temperature coefficient |
| 9 VDC alkaline, MN1604/PP3, 30 hr low battery indicator power supply |
| 300 VAC RMS or DC working voltage |
| 19 mm Dia maximum conductor |
| 4 mm safety connector output connection |
| Manual adjust via thumbwheel output zero |
| 1.5 m L cable |
| -20 to 85 deg C storage temperature range (with battery removed) |
| 15 to 85% non-condensing operating humidity |
| 300 VRMS, category III, pollution degree 2 |