Banner Engineering Q45BB6LV Q45BB6 Photoelectric Sensor, Rectangle Shape, 0.08 to 9 m Sensing, Visible Red Sensing Beam
Photoelectric Retroreflective Sensors
598880
MFG #: Q45BB6LV
BANNER®
136.91000
/ ea
Banner Engineering Photoelectric Sensor, Series: Q45BB6, Rectangle, Retro Reflective Sensing Method, 0.08 to 9 m Sensing Range, Visible Red Sensing Beam, 2 ms Response, Bi-Polar Output, 10/30 VDC, 50 mA, Quick-Disconnect, LED Light Source, 92.1 mm H x 54.2 mm W x 44.5 mm D, NEMA 6P/IP67, -40 to 70 deg C Operating, Environmental Conditions: 90 Percent at 50 deg C
- bannerengineering.com(Seller Home Page URL)
- Full Eng Drawing URL - Banner_Engineering_Q45BW13LVQ_Full_Engineering_Drawing.pdf(Full Eng Drawing URL)
- Tech Drawing URL - DRW_66248836557_Tech.pdf(Tech Drawing URL)
- Warranty URL - WAR_Banner_Warranty.pdf(Warranty URL)
- Spec Sheet URL - SPE_66248836557_Spec.pdf(Spec Sheet URL)
- Features
| Advanced one-piece photoelectric sensors with outstanding optical performance and extremely rugged design; The visible red sensing beam of these sensors makes them very easy to align; Highly visible power, signal (AID System) and output indicator LEDs; Versatile plug-in modules available for output timing logic and/or signal strength display; Designed to withstand 1200 PSI washdown; Potentiometer adjustments; Supply protection circuitry protected against reverse polarity and transient voltages; Output protection circuitry protected against false pulse on power-up and continuous overload or short circuit of outputs |
| Versatile mounting options |
| Advanced one-piece photoelectric sensors with outstanding optical performance and extremely rugged design |
| Highly visible power, signal (AID system) and output indicator LEDs |
| Ideal for use when the reflectivity and profile of the object to be sensed are sufficient to return a large percentage of emitted light back to the sensor |
| Protected against reverse polarity and transient voltages |
| Versatile plug-in modules available for output timing logic and/or signal strength display |
| Designed to withstand 1200 PSI washdown |
| Potentiometer located on top of sensor, beneath a transparent o-ring sealed cover |
| Protected against false pulse on power-up and continuous overload or short circuit of outputs |
| 30 mm barrel diameter |
| Non-polarized retroreflective mode photoelectric sensor |
| Less than 1 uA off-state leakage, less than 50 mA |
| 2 ms on/off response time |
| 680 nm visible red LED sensing beam |
| Acrylic lens, 90 percent at 50 deg C (non-condensing) relative humidity |
| 4-pin 4-wire 2 m cable connection |
| Reinforced thermoplastic polyester enclosure |
| Light/dark operate, bipolar (NPN and PNP) output, 250 mA maximum each output at 50 deg C, derated to 150 mA at 70 deg C, Output saturation voltage (both outputs) less than 1 V at 10 mA and less than 2 V at 250 mA |