Appleton® Unilets™ EDS175-R13 EDS Tumbler Switch, 120/277 VAC, 30 A, 2 hp
Tumbler-Snap Switch Control Stations
464367
MFG #: EDS175R13
Appleton™
386.31000
/ ea
EDS Series factory sealed tumbler switches prevent ignition of hazardous atmospheres by containing any arcing within a factory sealed enclosure. Many models are suitable for use in locations where Group B gases (hydrogen) are present. Front operated and side rocker arm models are available, and both types can be padlocked in either the on or off position.
- Features
| Corrosion resistant, strong stainless steel hex head cap screws attach cover/body/sealing chamber assembly for approved flame-tight construction |
| Enclosures have external mounting lugs for ease of mounting |
| Smooth, rounded integral bushing in each hub protects conductor insulation |
| Enclosures furnished with internal ground screw |
| Factory sealed switches are designed to a UL Standard so that any arcing devices are contained within an explosionproof labyrinth switch (standard switch and sealing chamber on select models) |
| Tumbler switch devices are approved for installation without additional external sealing fittings |
| Smooth double face, accurately ground surfaces on sealing chamber flange mate with cover and body to provide positive flametight construction |
| Smooth double-face, accurately ground surfaces on sealing chamber flange mate with cover and body to provide positive flame-tight construction |
| Sealing chamber has prewired factory sealed pigtail leads to switch |
| Threaded stainless steel operating handle provides positive corrosion resistant operation |
| Explosion proof, dust-ignition proof |
| Designed to prevent arcing of enclosed switches in ignitable atmospheres during connect and disconnect operation of lighting and light power loads |
| For use in classified areas where ignitable vapors, gases or highly combustible dusts are present. For installation in chemical plants, petrochemical plants, refineries, other process industries |
| (1) 3/4 in dead-end hub |
| 1 gang |
| 2 hp at 120/240 VAC |
| Zinc electroplated chromate epoxy powder coated malleable iron |
| Nylon 6/6 actuator |
| Rocker arm operated lever actuator |