Valenite Tiger-tec® Silver 6955642 Positive Single Sided Turning Insert, CCGT2(1.5)1-FN2 WNN10 ANSI, Rhombic, Carbide
CCGT Turning Inserts
PDW~12583828
MFG #: CCGT2(1.5)1-FN2WNN10
Walter (Valentine)
17.90000
/ ea
VALENITE Tiger-tec® Silver Turning Insert, Positive Single Sided, CCGT Insert, Rhombic, 2.5 mm Maximum Depth of Cut, 6.35 mm Inscribed Circle, 2.38 mm Thickness, FN2 Chipbreaker, 0.4 mm Corner Radius, Manufacturer's Grade: WNN10, ANSI Code: CCGT2(1.5)1-FN2 WNN10, ISO Code: CCGT060204-FN2 WNN10, 80 deg Included Angle, 7 deg Relief Angle, Neutral Hand, Carbide, Coated
- Features
| FN2 Geometry - For finishing ISO N |
| Finishing insert with fully ground circumference |
| For low cutting forces |
| Polished rake face |
| For long, small diameter shafts with a tendency to vibrate |
| 40 to 60 deg double countersink hole |
| WNN10 - For roughing and finishing |
| Applicable on ISO N alloys, aluminum alloys, copper alloys and magnesium alloys |
| +/-0.025 mm corner point tolerance |
| +/-0.13 mm thickness tolerance |
| +/-0.025 mm inscribed circle tolerance |
| 0.08 to 0.25 mm feed/rev |
| 6.45 mm cutting edge length |
| 11 deg rake |