Telemecanique 9012GFW2 Electro-Mechanical Pressure Switch, 90 to 2900 psi, 170 psi, 1NO/1NC 2SPDT/DB, Screw Clamp
Pressure Control Switches
31589
MFG #: 9012GFW2
Telemecanique Sensors
1035.26000
/ ea
Telemecanique 9012GFW2 PRESSURE SWITCH 480VAC 10AMP G +OPTIONS,-10...185 F,0.25 inch 18 NPTF conforming to UL 508,0.5 inch NPT conduit entrance,120 operating cycles per minute (max),2900 psi,90...2900 psi,Fixed Differential,NEMA 4/4X/13,Pressure Switch,SPDT (isolated),Single Stage,UL, CSA, IEC, CE-marked,Water tight, Dust tight, Oil tight and Corrosion Resistant (Indoor/Outdoor),air-hydraulic oil (-15...250 deg.F)-hydraulic oil (-15...250 deg.F)-non-corrosive gas-non-corrosive liquids
- Brochure URL - 11003_U15DY9OPJN7FG43B.pdf(Brochure URL)
- Catalog URL - Square_D_9012GAW1_Catalog.pdf(Catalog URL)
- Compliance Cert URL - Square_D_9012GFW2_Compliance_Certificate.pdf(Compliance Cert URL)
- Install Instructions 1 URL - 11003_NWBH1EARYZ74IVUX.pdf(Install Instructions 1 URL)
- Seller Home Page URL - us(Seller Home Page URL)
- Service Manual URL - 11003_CPJTB8F0X1VINW4H.pdf(Service Manual URL)
- Spec Sheet URL - 11003_4XLGSR62A83U1ZFJ.pdf(Spec Sheet URL)
- Applications
- Features
| Detection of 1 single threshold;Control circuit |
| SCREW-CLAMP TERMINALS, AWG 22...AWG 12 |
| High shock resistance |
| High set-point stability |
| Internal or external range adjustment |
| No drain line required |
| Dual numerical range scale (psi and kPa) |
| They have sealed pistons and can be used on air, water, oil or any media compatible with the actuator material |
| The switches come standard with stainless steel pistons and housings, Viton® diaphragms and O-ring seals and teflon retaining rings |
| NC-NO, 2 SPDT-DB, Form Z, snap action, silver nickel contacts |
| -15 to 250 deg F hydraulic oil, non-corrosive liquid, air and non-corrosive gas controlled fluid |
| 1/4 in 18 NPTF conforming to UL 508 fluid connection |
| Detection of single threshold, fixed scale |
| 4-screw terminal block |
| 22 to 12 AWG electrical connection |
| Zinc plated steel flange |
| Fluorocarbon (viton) diaphragm |
| 170 psi +/- 2.5% full scale approx differential at mid range |
| 1/2 in NPT conduit entrance cable entry |
| Die cast aluminum alloy housing |
| Panel mounting, 10 A/480 VAC |
| Watertight, dusttight, oiltight and corrosion resistant (indoor/outdoor) environmental conditions |