TRC® 26000011-6 TRC® SHOCK-SHIELD® 26000 011-6 Type SJTW-A GFCI In-Line Cord Set, 240 VAC, 20 A, 12 AWG Conductor
GFI In-Line Cordsets
800297
MFG #: 26000011-6
Coleman Cable
95.28000
/ ft
TRC® SHOCK-SHIELD® GFCI In-Line Cord Set, Type SJTW-A, 240 VAC, 20 A, 50/60 Hz, 12 AWG Conductor, 3 Conductors, -35 to 66 deg C Operating, NEMA 6-20R Receptacle, NEMA 6-20P Plug, Yellow, 2 in W x 1.89 in H. Images shown for wire are for illustrative purposes only. Color shade and packaging/spooling may vary.
- Brochure URL - 11169_UCNDXSME49AG5WPJ.pdf(Brochure URL)
- Brochure URL - jiqwlrpvorvu4i4ivsze(Brochure URL)
- http://www.colemancable.com(Seller Home Page URL)
- http://www.southwire.com(Seller Home Page URL)
- Install Instructions URL - TechnicalSupport.htm(Install Instructions URL)
- Spec Sheet URL - 11169_R951J6IYAWFX0LM4.pdf(Spec Sheet URL)
- Video - https://www.youtube.com/embed/3etVhr84oCY(Video)
- Warranty URL - TermsAndConditions(Warranty URL)
- Spec Sheet URL - IDW_DOCUMENT_3d5cf2c9d1a40a6f9063138ca82282cb9ae7cac48586c4ab3c732f8ba9a81d18.pdf(Spec Sheet URL)
- Applications
- Features
Construction |
GFCI in-line cord sets are excellent for industrial plant maintenance, equipment service and construction site applications |
Provides compliance with national electric code (NEC 2008) article 590.6 for temporary installations |
Rainproof rated |
To prevent unmonitored equipment startup, manual reset is required after GFCI trip and power outage |
4 Ohm typical grounded neutral |
Less than 25 ms trip response time for ground fault and grounded neutral trip |
3 kV ringwave test and 4 kV/2 kA surge immunity test voltage surge withstand |
Radio frequency noise susceptibility operates within normal limits with 0.5 volts injected on power line 150 kHz to 230 MHz |
3000 operations minimum endurance |
Six times rated current overload current |
5% maximum trip level variation effect of 10 A turn DC shock on ground fault trip |
1500 Vrms to 1 min insulation voltage |
Lighted indicator |
4 to 6 ma trip level |
UL listed for outdoor use |
Manual reset |