SolaHD HT5F6AS Non-Ventilated Automation Transformer, 480 VAC Delta Primary, 240Y/120 VAC Secondary, 6 kVA, 50/60 Hz
Hazardous Location Transformers
270632
MFG #: HT5F6AS
SolaHD™
1079.10000
/ ea
SolaHD encapsulated transformers are rated for Hazardous Locations as well as harsh industrial environments. Encapsulation and rugged UL Listed/NEMA Type 3R enclosures protect the transformer from dust, moisture and provide extra shock and vibration resistance. SolaHD transformers fully comply with the latest addition of the National Electrical Code for Class I, Division 2, Group A, B, C and D locations when installed in compliance with NEC 501.100 (B).
- Owners Manual URL - SolaHD_HS10F1_5AS_Manual.pdf(Owners Manual URL)
- Seller Home Page URL - solahd.aspx(Seller Home Page URL)
- Spec Sheet URL(Spec Sheet URL)
- Spec Sheet URL - 11375_YS97VP3X5WNOKH1F.pdf(Spec Sheet URL)
- Warranty 1 URL - WAR_appleton-grp-terms-and-conditions.pdf(Warranty 1 URL)
- Warranty URL - appleton-grp-terms-and-conditions.pdf(Warranty URL)
- Applications
- Features
Industrial |
50-1,000 VA, 50/60 Hz, suitable for world wide applications. Interleaved copper windings reduce I2R losses and maximize efficiency. 55 DEG C/131 DEG F rise, 105 DEG C insulation system to minimize heat. Epoxy encapsulated to protect cores and coils against moisture, dirt, and other contaminants. Meets or exceeds NEMA Standard ST 1 and ANSI C89.1 for load inrush capability. Integrally molded, flame retardant (IEC 707/ISO Class 1210) terminal blocks provide greater terminal contact area and improved conductivity. Heavy gauge steel mounting plate. Mounting dimensions are compatible with similar control transformers. Will only accept one FB2 secondary fuse holder. |
Conduit knockouts for side entry into wiring compartment |
0.500 - 45 kVA units are encapsulated with electrical grade silica and epoxy for industrial applications |
Electrostatically shielded for quality power on sizes 1 kVA and larger |
Copper wound designs |
UL Listed/NEMA Type 3R encapsulated enclosure for indoor and outdoor service |
Interleaved copper windings reduce I2R losses and maximize efficiency |
Epoxy encapsulated to protect cores and coils against moisture, dirt and other contaminants |
Meets or exceeds for load inrush capability |
Integrally molded, flame retardant (IEC 707/ISO Class 1210) terminal blocks provide greater terminal contact area and improved conductivity |
Mounting dimensions are compatible with similar control transformers |
Will only accept one FB2 secondary fuse holder |
Heavy gauge steel mounting plate |
7.2 A primary, 14.4 A secondary |