Sandvik Coromant 7190866 T-Max® P Turning Insert, DNGA331S0525H 7115, D-55 deg Diamond, DNGA Insert, 7115, Carbide
DNGA Turning Inserts
1244033
MFG #: 7190866
Sandvik Coromant
183.51000
/ ea
Sandvik Coromant Turning Insert, Series: T-Max® P, DNGA Insert, D-55 deg Diamond, 0.016 in Maximum Depth of Cut, 3/8 in Inscribed Circle, 0.187 in Thickness, 11 mm Length, 0.016 in Corner Radius, Manufacturer's Grade: 7115, ANSI Code: DNGA331S0525H 7115, ISO Code: DNGA110404S01525H 7115, 55 deg Included Angle, 0 deg Relief Angle, Neutral Hand, Carbide, PVD Coated, Material Grade: H
- Features
| Improved coating adhesion prevents chipping and provides stable machining |
| Micro TiCN coating provides excellent wear resistance |
| Hard surface layer - provides advanced wear resistance |
| Strong intra coating adhesion - higher adhesion between each layer with improved crystal structure |
| Micro TiCN layer - higher coating hardness is possible due to a micro TiCN crystal structure, resulting in increased wear resistance |
| CA315 grade excellent performance for machining gray and nodular cast iron by optimizing the total coating layer thickness |
| For continuous to interrupted machining with a good balance of wear resistance and stability |
| High efficiency and long tool life |
| C chipbreaker - suitable for general purpose machining at feed rate 0.008 to 0.014 ipr |