Sandvik Coromant 6398587 CoroMill® 331 Side and Face Milling Insert, N331.1D-136508M-PM 4230, S-Square, N331.1D..M-PM Insert, Carbide, 4230, N331.1D-136508M-PM 4230
N331 Milling Inserts
1230524
MFG #: 6398587
Sandvik Coromant
21.33000
/ ea
Sandvik Coromant Milling Insert, Side and Face, Series: CoroMill® 331, N331.1D..M-PM Insert, S-Square, 0.5275 in Inscribed Circle, 0.2578 in Thickness, 0.5275 in Length, PM Chipbreaker, 0.0314 in Corner Radius, Negative Rake, 0 deg Lead Angle, 0.1712 in Hole Dia, Manufacturer's Grade: 4230, ANSI Code: N331.1D-136508M-PM 4230, ISO Code: N331.1D-136508M-PM 4230, Neutral Hand, Carbide, MTCVD Coated, Material Grade: P
- Features
| 40 to 60 deg countersunk hole and non-flat surface clamping interface |
| 0 deg clearance |
| 11.4 mm D cutting |
| 1.2 mm L wiper edge |
| 90 deg included |
| 88 deg major cutting edge |
| 11.4 mm L effective cutting edge |
| 2-side cutting |
| 20 life cycle state |
| 4 corner |
| E cutting edge condition |
| 8 cutting edge |
| Screw clamp mounting |
| 0.1 to 0.29 mm/r cutting feed |