Sandvik Coromant 6332110 CoroDrill® 800 Ejector Right Hand With Indexable Inserts, 1.8503 in, 2.1338 in Dia Max Drill
Drill Heads
1228877
MFG #: 6332110
Sandvik Coromant
1113.48000
/ ea
In deep hole machining, a combination of tool design and cutting fluid pressure is used to evacuate the chips out of the hole. Both the Single tube system and Ejector drill system can produce holes with excellent surface finish, close dimensional tolerance and concentricity. CoroDrill® 800 with central insert L-geometry adds to excellent chip formation and evacuation.
- Features
| SZ 12 ejector head machine side compatibility |
| 800-08 T3 08M-I-G, 800-10 T3 08M-C-G, 800-11 T3 08H-P-G compatible inserts |
| Axial concentric coolant entry |
| Axial concentric coolant exit |
| 112.739 mm L functional |
| 112.738 mm overhang |
| 7.261 mm L point |
| 4000 r/min |
| 0.1 mm achievable hole tolerance |
| 800.24..D tool style |
| Excellent surface finish |
| Process security |
| Good concentricity |
| Excellent chip control and evacuation thanks to central insert L-geometry |
| Laser marking of code, dimension and tube range |
| Excellent chip control in both low and high feeds due to the coolant accelerator |
| Wide range of grades suitable for machining in all materials |
| Few inserts and support pad sizes cover the whole diameter range |
| 20 life cycle state |
| ANSI Code: 800.24-12D54.20 |