Juno® TL601E-75-BL Trac 12™ TL601E Electronic Transformer, 0.59 A, 12 VAC, 75 W, 20 KHz, Lead Wire, 0.98
Track Lighting Transformers
586581
MFG #: TL601E 75W 120 12AC BL
Juno®
160.11000
/ ea
12V electronic transformers (LED compatible) trac 12 LED compatible electronic driver/transformers are compact and lightweight - and thus ideal for mounting in close proximity to the trac. They are designed for 120 V input and may be dimmed using a variety of dimmers qualified by Juno for use with a non-resistive LED load. These driver/transformers are recommended for trac run lengths not exceeding 21 feet. TL601E is supplied with 18" jacketed secondary wire; TL602E has an open slot in the housing for class 2 secondary wires to exit. While specifically designed for use with trac 12 LED luminaires, these electronic transformers are compatible with all trac 12 low voltage luminaires including incandescent.
- Brochure URL - 10988_MTDCG0LSOF7149BU.pdf(Brochure URL)
- Catalog URL - Juno_TL601E_10_WH_Catalog.pdf(Catalog URL)
- http://www.lithonia.com(Seller Home Page URL)
- Install Instructions 1 URL - 10988_QJT8175LMR9OVGSN.pdf(Install Instructions 1 URL)
- Install Instructions URL - P2471.pdf(Install Instructions URL)
- Line Drawing URL - 10988_RZGPYHJB0AST5CVK.gif(Line Drawing URL)
- Spec Sheet 1 URL - Juno_TL601E_10_WH_Data_Sheet.pdf(Spec Sheet 1 URL)
- Spec Sheet URL - 10988_WKQGBE1T5MIXSUC9.pdf(Spec Sheet URL)
- Applications
- Features
| Cove Lighting; Display and Casework; Trac Lighting; Undercabinet |
| 120 VAC input voltage |
| 15 % total harmonic distortion |
| Ideally suited for driving Juno trac 12 LED fixtures |
| LED compatible |
| Use for short to medium run lengths and low to medium wattage systems |
| Rated for 0.5-75 W total load |
| For optimal results, use dimmers specifically designed for use with electronic transformers |
| Install surface mount units in well-ventilated location where ambient temperature will not exceed 120 deg F |
| May also be used to operate low wattage incandescent load |
| Transformers used with Juno LED fixtures should only be operated with dimmers pre-qualified for suitability by Juno Engineering |
| Replaceable fuse on primary |
| Must be mounted within 18 in of trac feed point |
| Terminal block wiring connections for faster, simpler installation |
| 17-in nominal sleeved, stripped, and tinned lead-wires provided to connect output to trac feed connector |
| Low profi le 1-inch overall height |
| Ground screw for simple ground wire attachment and two 1/2-inch No. 6 wood screws for mounting to wood surfaces |
| To avoid excessive voltage drop, maximum trac LED from driver is 21 feet |
| Direct-wire versions supplied with die-cast fitting for 3/8-inch flexible metal conduit |