Hubbell Wiring Device-Kellems HBL4100P9W Grounding Male Watertight Pin & Sleeve Plug, 250 VAC, 100 A, 3 Poles, 4 Wires, Blue
Pin & Sleeve
26981
MFG #: HBL4100P9W
Hubbell Wiring Device-Kellems
770.86000
/ ea
Wiring Device-Kellems Pin & Sleeve Plug, Grounding Male Watertight, 250 VAC, 100 A, 3 Pole, 4 Wires, Grade: Industrial, IP67 Enclosure, -40 to 75 deg C, Pressure Screw Terminal, Composite, Blue, 4.92 in Dia x 12.63 in L
- Catalog URL - HUBBELL_HBL4100MI5W_Catalog.pdf(Catalog URL)
- http://www.hubbell-wiring.com/(Seller Home Page URL)
- Install Instructions 1 URL - 11456_PDY5FZ2LGIMES1BW.pdf(Install Instructions 1 URL)
- Install Instructions 1 URL - WIRING_PD1303_INSTALLINST.pdf(Install Instructions 1 URL)
- Line Drawing URL - 11456_BNXZF5MT62V1Y0PS.pdf(Line Drawing URL)
- Line Drawing URL - WDK_HBL4100P9W_DRAWING_PDF.pdf(Line Drawing URL)
- Spec Sheet URL - 11456_YGQNMTBR0UAV3OX1.pdf(Spec Sheet URL)
- Spec Sheet URL - WIRING_HBL4100P9W_spec.pdf(Spec Sheet URL)
- Tech Drawing URL - WIRING_HBL4100P9W_M13335_ACAD_DRAWING.dwg(Tech Drawing URL)
- Warranty URL - 11456_Y8PS6T0FNOGH3Q75.pdf(Warranty URL)
- Warranty URL - Wiring_WDK_Warranty.pdf(Warranty URL)
- Applications
- Features
| High Ampacity Connections |
| Watertight |
| 3 to 1/0 AWG wire |
| Cord mounted, 4 wire grounding |
| 1.065 to 1.94 in cord clamp range |
| Non-metallic, watertight and abuse resistant |
| Zytel 801 nylon housing, Rynite® SST35 cord clamps, gland cap and locking ring, high impact thermoset contact carrier and retainer and brass ground/phase pins |
| 300 series stainless steel terminal assembly and cord clamp screws nickel plated brass clamp nut |
| Dielectric withstand voltage 3000 VAC minimum |
| Maximum 30 deg C temperature rise at full rated current after 50 cycles of overload at 150% of rated current at a power factor of 75% temperature rise |
| Made of Zytel 801 nylon |
| 5000 connect and disconnect cycles with load for 16A and 20A, 1000 cycles with load and 1000 cycles without load for 30A, 32A, 60A and 63A, and 250 cycles with load and 250 cycles without load for 100A and 125A endurance |
| Watertight per IEC 60309-1 moisture resistance |
| Made of Zytel 801 nylon |