Decora® ODS10-IDG 1-Pole Single Relay Wall Mount Occupancy Sensor, 120/230/277 VAC, Passive Infrared Sensor, 180 deg

Occupancy Sensors
71935 MFG #: ODS10-IDG
53.91000 / ea
The Leviton Decora® wall switch passive infrared (PIR) occupancy sensor (ODS10-ID) uses passive infrared (PIR) detection technology to monitor a room for occupancy through a segmented fresnel lens. This specialized lens divides the field-of-view into sensor zone. When a person passes into or out of a sensor zone the sensor detects motion and switches the lights ON. The lights will remain ON as long as there is an occupant moving through the sensor zone.
  • Applications
  • Features
Fits in Standard Wallbox and Replaces Single-Pole Wall Switch, 180ª Field-Of-View Provides Approximately 195m2 of Coverage Suitable for Small Offices, Conference Rooms, Classrooms, Lounges and a Variety of Commercial Areas, Convenient Pushbutton Provides
Neutral wire not required
Grounding wire required
External power pack not required
Commercial grade and internal photocell
Ambient light Override
800 W at 120 VAC primary relay incandescent, 1200VA at 120 VAC, 2700VA at 277 VAC primary relay fluorescent, 1/4 hp at 120 VAC motor load ratings
-10 to 85 deg C storage temperature range
20% to 90% non-condensing relative humidity
For indoor use only
Fits in standard wallbox and replaces single-pole wall switch
Low-profile design eliminates obtrusive "scanning-device" look
180 deg field-of-view provides approximately 2100 square feet of coverage
Convenient pushbutton provides manual-on/off light switching at any time
Two dual element PIR sensors used to widen detection range
Vandal resistant PIR lens
Manual-on/auto-off mode for installations where manual-on switching is required but auto-off switching is still desired for CEC Title 24 energy savings
Light sensor enables the load hold-off feature once level has been set
False detection circuitry
Motor load type