Banner Engineering S18UBAQ S18U Ultrasonic Proximity Sensor, 10 to 30 VDC, Time of Flight Sensing, Bi-Polar NPN/PNP Output
Ultrasonic Proximity Sensors
63520
MFG #: S18UBAQ
BANNER®
274.52000
/ ea
Banner Engineering Ultrasonic Proximity Sensor, Series: S18U, Time of Flight Sensing Method, 30 to 300 mm Sensing Distance, LED Light Source, Bi-Polar NPN/PNP Output, 10 to 30 VDC, 40/65 mA, 300 kHz, Integral Quick Disconnect, 5 ms Response, NEMA 6P/IP67, -20 to 60 deg C, ABS, Environmental Conditions: -40 to 80 deg C Storage Temperature, 100% Non-Condensing Relative Humidity, IEC 60947-5-2 Requirements 30 11 ms Duration Half Sine Wave Mechanical Shock
- bannerengineering.com(Seller Home Page URL)
- Compliance Cert URL - Banner_S18UUARQ_Compliance_Certificate.pdf(Compliance Cert URL)
- Full Eng Drawing URL - Banner_Engineering_S18UBAR_Full_Engineering_Drawing.pdf(Full Eng Drawing URL)
- Spec Sheet URL - SPE_108964.pdf(Spec Sheet URL)
- Tech Drawing URL - Banner_S18UBAQ_Technical_Drawing.pdf(Tech Drawing URL)
- Warranty URL - WAR_product-warranty.pdf(Warranty URL)
- Features
Straight housing; Fast, easy-to-use TEACH-Mode programming; no potentiometer adjustments; Short dead zone; Two bi-colored status LEDs; Rugged encapsulated design for harsh environments; Temperature compensation; Configurable for normally open or normally closed operation; Fast response time (5 MS); Protected against short circuit conditions; Protected against reverse polarity and transient voltages; Remote TEACH input: 12 KOHM impedance |
Straight barrel housing style |
M12 euro style quick disconnect cable connection requires mating cordset |
5-pins |
Protected against short circuit conditions output protection |
10 min warm-up time |
5 mm window size |
Supply protection circuitry protects against reverse polarity and transient over voltage |
Discrete input/output |
Push button, remote teach adjustments |
0.02% of sensing distance/deg C temperature effect |
300 ms delay at power-up |
2.5 ms repeatability |
18 mm barrel diameter |
12 kOhm remote teach and laser control input impedance |
0.7 mm discrete output hysteresis |
ABS/polycarbonate primary housing materia |