MULTI-BEAM 3 and 4-wire scanner blocks offer a complete complement of sensing modes; Sensing range depends on fiber used; includes Alignment indicating Device (AID™); input and output depends on power block; Fiber optics are often used to sense small parts which move at a high rate of speed can require sensors with fast response times for reliable detection; Selection of the fiber optic sensing tip should involve matching the effective beam of the fiber to the profile of the part to be sensed to maximize the time that the part is sensed and/or the time between adjacent parts; Combining the best selection of fiber tip geometry with a high speed sensor will result in a highly repeatable position sensing system; Response time of a MULTI-BEAM sensor is also a function of the power block, for this reason only power blocks which switch DC should be used if the f |