Banner Engineering EZ-SCREEN® SLPP25-410P88 Low Profile Safety Light Screen Pair, 16.1 mm H Protected, 21 Beams
Safety Light Curtains
492592
MFG #: SLPP25-410P88
BANNER®
1631.52000
/ ea
Banner Engineering EZ-SCREEN® Safety Light Screen Pair, Low Profile, 16.1 mm Protected Height, 0.1 to 7 m Operating, 21 Beam, 16.1 mm Overall Height, 9.5 ms Response, +/-2.5 deg Aperture Angle, Infrared LED Light Source, 24 VDC Supply Voltage, 2 PNP Safety Output Rating, 60 mA Supply, 60/150 mA Output, Aluminum Housing, Polyester Powder Coated, IP65, Pigtail Quick-Disconnect, 300 mm Cable Length, 0 to 55 deg C, Bracket Mount
- Features
| A two-piece optoelectronic safeguarding device; Creates a screen of synchronized, modulated infrared, sensing beams that extend from end to end of the housing (no dead zone); Low-profile, compact package for smaller production machines, robust for large power presses; Easily configured reduced resolution and fixed blanking, remote teach of fixed blanking option on cascade models; Zone and status indicators plus digital display to indicate number of beams blocked, detailed diagnostics; Highly immune to EMI, RFI, ambient light, weld flash, and strobe light; Vibration-tolerant, factory burned-in emitter and receiver circuitry for toughness and dependability; FMEA tested to ensure control reliability; Safety PLC input compatible (per OSSD specifications); All inputs and outputs are protected from short circuits to 24 VDC or DC common; 95 PCT maximum relat" |
| A two-piece optoelectronic safeguarding device |
| Creates a screen of synchronized, modulated infrared, sensing beams that extend from end to end of the housing (no "dead" zone) |
| Low-profile, compact package for smaller production machines, robust for large power presses |
| Easily configured reduced resolution and fixed blanking, remote teach of fixed blanking option on cascade models |
| Zone and status indicators plus digital display to indicate number of beams blocked, detailed diagnostics |
| Highly immune to EMI, RFI, ambient light, weld flash, and strobe light |
| Vibration-tolerant, factory burned-in emitter and receiver circuitry for toughness and dependability |
| FMEA tested to ensure control reliability |
| Safety PLC input compatible (per OSSD specifications) |
| All inputs and outputs are protected from short circuits to 24 VDC or DC common |
| 95 PCT maximum relative humidity (non-condensing) relative humidity |
| Output signal switching devices Two redundant solid state 24 VDC, 0.5 AMP max sourcing OSSD (Output Signal Switching Device) safety outputs, on-state voltage greater than or equal to Vin - 1.5 VDC, off-state voltage 1.2 VDC max (0 -1.2 VDC), max load capacitance 1 MFD, max load inductance 10 H, leakage current 0.5 mA maximum, cable resistance 10 OHM maximum, OSSD test pulse width 100 - 300 MICSEC, OSSD test pulse period 10 - 27 MICSEC (varies with number of beams), switching current 0 - 0.5 AMP |
| 2 PNP (trip/latch) safety output rating |
| 24 VDC at 60 mA maximum emitter, 24 VDC at 150 mA maximum receiver power supply |
| Black Zinc 14 GA Cold-Rolled Steel Swivel End-Mounting Brackets And Two Swivel Side-Mount Brackets Pair mounting |
| M12 pigtail quick disconnect |
| 25 mm resolution |
| 850 NMTR infrared LED light source |
| Plus/minus 2.5 deg at 3 m |
| Yellow polyester powder |