3M™ 054007-09676 Cable Accessory Sealing Kit, Black

Splices or Splice Plates
69596 MFG #: 8453
3M®
51.35000 / ea
3M cable accessory sealing kits provide a reliable means of sealing the jacket end of power cables where elbows or other cable accessories are installed. The seal is accomplished with the use of a tubular rubber sleeve and rubber base mastic sealing strips. The mastic strips seal around cable neutral wires or other ground attachment leads. The rubber sleeve is factory expanded and assembled onto a removable core. As supplied in this pre-stretched condition the tube is ready for field installation. With mastic in place, the expanded tube is positioned over the cable jacket end and the inner supporting core is removed. Removing the core allows the sealing tube to shrink and form a water-resistant seal. The sealing tube is made of EPDM rubber that contains no chlorides or sulfur. Both the sealing tube and mastic are compatible with commonly used power cable jacket and semi-conductive materials. To extend the useful life of this product in applications which are continuously exposed to high levels of ultra-violet radiation, overwrap with Scotch super 33+ vinyl tape or Scotch 70 Silicone Tape.
QTY
  • Features
Both the sealing tube and mastic are compatible with commonly used power cable jacketing and semiconductive materials
(15 kV) 2/0 AWG to 1000 kcmil (70 to 500 sq-mm), (25 kV) 1/0 AWG to 750 kcmil (60 to 380 sq-mm) cable size by voltage
1/0, 2/0, 3/0 AWG, 250, 450, 500, 400, 700, 900, 750, 1000, 800, 600, 300 and 350 kcmil conductors
1.28 in Dia seal
4 mastic sealing strips
Jacketed concentric neutral shielding
Accommodates a wide range of cable
No torch or heat required
Seals tight, retains its resiliency and pressure even after prolonged years of aging and exposure
Thick walled to resist puncture and damage
Water-resistant
Compatible with cable jackets and semi-conducting insulation shields
Resists fungus
Resists acids and alkalies
Resists ozone and ultraviolet light