Decora® OSSMT-MDW 1-Pole Wall Mount Occupancy Sensor, 120/230/277 VAC, Multi-Technology (PIR/Ultrasonic) Sensor
Electrical Switches
257123
MFG #: OSSMT-MDW
Leviton®
85.43000
/ ea
- Application: Commercial
- ARRA Compliant: C
- Buy American Compliant: C
- Catalog Number: OSSMT-MDW
- Color: White
- Connection Type: Operating Temperature (0 to +40 DEG C);Storage Temperature (-10 to +85 DEG C);Humidity (20% to 90% Non-Condensing)
- Control Output: Manual On/Automatic Off
- Country of Origin: CN
- Currency: USD
- Dimensions: 46 in H x 1.75 in W x 1.85 in D
- Environmental Conditions: Operating Temperature (0 to +40 DEG C);Storage Temperature (-10 to +85 DEG C);Humidity (20% to 90% Non-Condensing)
- EU RoHS Indicator: C
- Frequency Rating: 50/60 Hz
- Gross Weight Per Pack: 0.3700 lb
- Gross Weight per Pack Metric: 0.17
- Height: 4.62 in
- Lamp Type: Fluorescent/Incandescent/Tungsten
- Length: 2.88 in
- Mounting: WALL
- Power Consumption: 390 @ 120V (U/S & PIR);190 @ 120V (PIR only);480 @ 277V (U/S & PIR);270 @ 277V (PIR only);500 @ 347V (U/S & PIR);350 @ 347V (PIR only) MILWTT
- Power Rating: 390/190/270/350 mW
- Replaced Catalog Number: OSSMT-MAW
- Response Frequency: 50/60 Hz
- Series: Decora
- Size: 46 H x 1.75 W x 1.85 D in
- Standard: UL Listed;cUL Listed;CSA Certified;CEC Title 24 Compliant;FCC Compliant;NAFTA (CF434)
- Standards: ARRA CompliantBuy American Act CompliantRoHS CompliantUL/cUL ListedCSA CertifiedCEC Title 24 CompliantFCC CertifiedNAFTA CF434
- Sub Brand: Decora
- Supply Voltage: 120/230/277/347 VAC
- Temperature Rating: 0 to 40 °C
- Time Delay: 30 sec to 30 min
- Type: Occupancy Sensor;Single-Pole Switch
- UNSPSC: 45111808
- UPC 11: 07847727937
- UPC 12: 078477279373
- Width: 1.88
- Width [Metric]: 4.7625
- Stock Status: NORMALLY STOCKED
- Brand: Leviton®
- Manufacturer: Leviton Manufacturing Co., Inc.
- Coverage: 2400 ft²
- Voltage Rating: 120/230/277/347 VAC
- Mounting Type: Wall
- Sensor Type: Multi-Technology/PIR/Ultrasonic
- Viewing Angle: 180 °
Leviton's wall mount occupancy sensors are low voltage occupancy detectors that work in conjunction with various Leviton products. The motion sensors main function is to turn the lights on or maintain the lights on while movement is detected. Available in ultrasonic or infrared. Leviton occupancy sensors and vacancy sensors are Title 24 and ASHRAE 90.1 compliant.
- http://www.leviton.com(Seller Home Page URL)
- Install Instructions URL - DI-0XX-OSSMT-02C-W.pdf(Install Instructions URL)
- Safety Data Sheet URL - MSDS.pdf(Safety Data Sheet URL)
- Spec Sheet 1 URL - G-7357G_OSSMT_Data_Sheet_-_REV_SEP_2021.pdf(Spec Sheet 1 URL)
- Spec Sheet URL - 10962_OTBKFPC8Z03MJG14.pdf(Spec Sheet URL)
- Spec Sheet URL - OSSMT-MDW.pdf?products=OSSMT-MDW&locale=en(Spec Sheet URL)
- Video - https://www.youtube.com/embed/jK48BrNhHBw(Video)
- Applications
- Features
| Commercial |
| Fast, Simple Installation Fits in a Standard Wall Box and Replaces a Single-Pole Wall-Switch, Neutral and No Neutral Options Available, Convenient Pushbutton Provides Manual-ON/OFF Light Switching at any Time, Segmented Fresnel Lens Provides Optimum Sensi |
| Fast, simple installation fits in a standard wallbox and replaces a 1-pole wall switch |
| Sensor can be ganged together with other units in a multiple-switch wallplate |
| Low profile design eliminates obtrusive "scanning-device" look |
| Convenient pushbutton provides manual ON/OFF light switching at any time |
| Segmented fresnel lens provides optimum sensitivity and performance designed with an extensive "minor motion" area where even slight body movements will be detected |
| Vandal resistant PIR lens |
| Adjustable horizontal field-of-view (PIR may be adjusted between 180 and 60 deg of arc by using integral blinders located on either side of the lens), no masking required |
| Manual ON/auto OFF mode for installations where manual ON switching is required but auto OFF switching is still desired for CEC title T24 energy savings |
| To comply with CED title 24, LED indicator light flashes when sensor detects motion to verify detection is active, green flashes for ultrasonic, red flashes for PIR |
| The delayed OFF time is preset at 30 min in the auto-adapting mode, the LED will flash when the adjusting knob is set to the indicated time value |
| Ambient light recognition integrated light sensor prevents lights from turning ON when the room is adequately illuminated by natural light |
| Self-adaptive technology callbacks for adjustment are eliminated, time delay and sensitivity settings are continually adjusted to occupant patterns of use in auto adapt mode |
| Exclusive Walk-through feature provides increased energy savings by not leaving the lights ON for an extended period after only momentary occupancy |
| Vacancy confirmation when the time out expires and the relays turns OFF, a 30 sec (OSSMT-G) or 40 sec (OSSMT-M) vacancy confirmation exists to turn the relays back ON |
| False detection circuitry |
| Small motion sensitivity ultrasonic technology provides excellent minor motion sensitivity |
| Presentation mode feature for slide or film presentations allows pushbuttons to turn lights OFF and keep them OFF while the room is occupied |
| Exclusive Leviton® high inrush stability (HIS) circuitry, specifically designed to handle today's high inrush electronic ballast loads and offer unmatched durability and service |
| True zero cross relay switches at the zero crossing point of the AC power curve to ensure maximum contactor life and compatibility with electronic ballasts |
| Elegant Decora® wallplates complement any interior for sleek aesthetics, uses Decora® wallplates and coordinates with Leviton® popular line of Decora® wiring devices |