SolaHD DT651F7.5S Ventilated Drive Isolation Transformer, 460 VAC Delta Primary, 460Y/266 VAC Secondary, 7.5 kVA, 60 Hz
Drive Isolation Transformers
164423
MFG #: DT651F7.5S
SolaHD™
1361.50000
/ ea
- Application: SCR Variable Speed Drives
- ARRA Compliant: Y
- Buy American Compliant: Y
- Catalog Number: DT651F7.5S
- Country of Origin: US
- Currency: USD
- Dimensions: 10 in L x 20 in W x 17 in H
- Enclosure: Nema 3R with weather shield
- Enclosure Type: NEMA 3R
- EU RoHS Indicator: C
- Frequency: 60 Hz
- Gross Weight Per Pack: 242.5000 lb
- Gross Weight per Pack Metric: 110.00
- Gross Weight UOM Metric: kg
- Height: 16.00 in
- Height [Metric]: 40.6400 cm
- KVA Rating: 7.5
- Length: 17.50 in
- Length [Metric]: 44.4500 cm
- Mounting Type: Wall
- NEMA Frame Size: NEMA 3R
- Number Of Phases: 3
- Standard: cULus Listed: E77014, UL 506, CSA C22.2 No. 66, Listed E25872, UL 1561
- Standards: ARRA CompliantBuy American Act CompliantRoHS CompliantcULus File No. E77014UL 506 File No. E25872UL 1561 File No. E25872CSA C22.2 No. 66
- Type: Ventilated
- UNSPSC: 39121029
- UPC 11: 78347254240
- UPC 12: 783472542406
- Width: 16.50 in
- Width [Metric]: 41.9100 cm
- Stock Status: NONSTOCK
- Brand: SolaHD™
- Manufacturer: Emerson
- Frequency Rating: 60 Hz
- Phase: 3 pH
- Power Rating: 7.5 kVA
- Primary Voltage: 460 Delta VAC
- Secondary Voltage: 460Y/266 VAC
- Seller Home Page URL - solahd(Seller Home Page URL)
- Seller Home Page URL - solahd.aspx(Seller Home Page URL)
- Spec Sheet URL - 11375_Drive-Isolation-Xformer.pdf(Spec Sheet URL)
- Spec Sheet URL - catalog-solahd-drive-isolation-transformers-en-us-163704.pdf(Spec Sheet URL)
- Spec Sheet URL - Drive-Isolation-Xformer.pdf(Spec Sheet URL)
- Warranty URL - appleton-grp-terms-and-conditions.pdf(Warranty URL)
- Applications
- Features
SCR Variable Speed Drives |
Isolation minimizes load disturbances caused by the SCR drive. Taps on all units for adjustments to incoming source voltage. Full capacity secondary neutral as required by the NEC. |
Taps on all units for adjustments to incoming source voltage |
Full capacity secondary neutral as required by the national electric code |
Shielding attenuates line to ground noise |
Isolation minimizes load disturbances caused by the SCR drive |
A transformer is needed to magnetically isolate the incoming line from the motor drive |
The transformer must also provide a voltage change to match the required voltage of the SCR drive |
Standard designs are delta primary and wye secondary to match the common power sources required in most 3-phase rectifier circuits |
Designed to handle the mechanical stresses, voltage demands and harmonics associated with SCR applications |
Designed to handle the mechanical stresses, voltage demands and harmonics associated with SCR applications |