Sandvik Coromant 6707397 T-Max® P Negative Basic Shape Turning Insert, CNMG 644-MR 4305, C-80 deg Diamond, CNMG Insert
CNMG Turning Inserts
1236582
MFG #: 6707397
Sandvik Coromant
40.83000
/ ea
- Alternate Catalog Number: CNMG 644-MR 4305
- ANSI Code: CNMG 644-MR 4305
- Catalog Number: 6707397
- Corner Radius: 0.062 in
- Country of Origin: SE
- Finish: CVD-TiCN+Al2O3+TiN Coated
- Gross Weight Per Pack: 0.6700 lb
- Hole Diameter: 0.312 in
- Included Angle: 80 °
- ISO Code: CNMG 19 06 16-MR 4305
- Item Group: 112
- Relief Angle: 0 °
- Series: T-Max® P
- Thickness: 1/4 in
- Stock Status: NONSTOCK
- Brand: Sandvik Coromant
- Manufacturer: Sandvik Coromant
- Chipbreaker: MR
- Cutting Direction: Neutral
- For Use On: Cast Iron and Steel
- Inscribed Circle: 3/4 in
- Insert Size: 644
- Insert Style: CNMG
- Manufacturer's Grade: 4305
- Material: Carbide
- Material Grade: K, P
- Maximum Depth of Cut: 0.472 in
- Rake: Negative
- Seat Size: 19
- Shape: Rhombic
Sandvik Coromant Turning Insert, Negative Basic Shape, Series: T-Max® P, CNMG Insert, C-80 deg Diamond, 12 mm Maximum Depth of Cut, 3/4 in Inscribed Circle, 1/4 in Thickness, 0.7615 in Length, MR Chipbreaker, 0.0624 in Corner Radius, 0.312 in Hole Dia, Manufacturer's Grade: 4305, ANSI Code: CNMG 644-MR 4305, ISO Code: CNMG 19 06 16-MR 4305, 80 deg Included Angle, 0 deg Relief Angle, Neutral Hand, Carbide, MTCVD Coated, Material Grade: K/P
- Features
| T5305 grade fine grained substrate with a low cobalt content |
| Thick layer of MT-CVD coating with a layer of Al2O3 on the surface |
| Special finish for coating |
| Top performance for machining gray cast iron |
| Material with the highest abrasion resistance of the 5300 series |
| High cutting speeds |
| Continuous and slightly interrupted cut |
| 20 life cycle state |