Sandvik Coromant 6707389 T-Max® P Negative Basic Shape Turning Insert, CNMG 544-MR 4305, C-80 deg Diamond, CNMG Insert
CNMG Turning Inserts
1238026
MFG #: 6707389
Sandvik Coromant
29.26000
/ ea
- Alternate Catalog Number: CNMG 544-MR 4305
- ANSI Code: CNMG 544-MR 4305
- Catalog Number: 6707389
- Corner Radius: 0.062 in
- Country of Origin: SE
- Finish: CVD-TiCN+Al2O3+TiN Coated
- Gross Weight Per Pack: 0.4900 lb
- Hole Diameter: 1/4 in
- Included Angle: 80 °
- ISO Code: CNMG 16 06 16-MR 4305
- Item Group: 112
- Relief Angle: 0 °
- Series: T-Max® P
- Thickness: 1/4 in
- Stock Status: NONSTOCK
- Brand: Sandvik Coromant
- Manufacturer: Sandvik Coromant
- Chipbreaker: MR
- Cutting Direction: Neutral
- For Use On: Cast Iron and Steel
- Inscribed Circle: 5/8 in
- Insert Size: 544
- Insert Style: CNMG
- Manufacturer's Grade: 4305
- Material: Carbide
- Material Grade: K, P
- Maximum Depth of Cut: 0.421 in
- Rake: Negative
- Seat Size: 16
- Shape: Rhombic
Sandvik Coromant Turning Insert, Negative Basic Shape, Series: T-Max® P, CNMG Insert, C-80 deg Diamond, 10.7 mm Maximum Depth of Cut, 5/8 in Inscribed Circle, 1/4 in Thickness, 0.6346 in Length, MR Chipbreaker, 0.0624 in Corner Radius, 1/4 in Hole Dia, Manufacturer's Grade: 4305, ANSI Code: CNMG 544-MR 4305, ISO Code: CNMG 16 06 16-MR 4305, 80 deg Included Angle, 0 deg Relief Angle, Neutral Hand, Carbide, MTCVD Coated, Material Grade: K/P
- Features
| T5305 grade fine grained substrate with a low cobalt content |
| Thick layer of MT-CVD coating with a layer of Al2O3 on the surface |
| Special finish for coating |
| Top performance for machining gray cast iron |
| Material with the highest abrasion resistance of the 5300 series |
| High cutting speeds |
| Continuous and slightly interrupted cut |
| 20 life cycle state |