Sandvik Coromant 6666946 T-Max® P Negative Basic Shape Turning Insert, CNMG 432-XM 4325, C-80 deg Diamond, CNMG Insert
CNMG Turning Inserts
1238032
MFG #: 6666946
Sandvik Coromant
16.66000
/ ea
- Alternate Catalog Number: CNMG 432-XM 4325
- ANSI Code: CNMG 432-XM 4325
- Catalog Number: 6666946
- Corner Radius: 0.0312 in
- Country of Origin: SE
- Finish: CVD-TiCN+Al2O3+TiN Coated
- Gross Weight Per Pack: 0.2200 lb
- Hole Diameter: 0.2029 in
- Included Angle: 80 °
- ISO Code: CNMG 12 04 08-XM 4325
- Item Group: 112
- Relief Angle: 0 °
- Series: T-Max® P
- Thickness: 0.187 in
- Stock Status: NONSTOCK
- Brand: Sandvik Coromant
- Manufacturer: Sandvik Coromant
- Chipbreaker: XM
- Cutting Direction: Neutral
- For Use On: Cast Iron and Steel
- Inscribed Circle: 1/2 in
- Insert Size: 432
- Insert Style: CNMG
- Manufacturer's Grade: 4325
- Material: Carbide
- Material Grade: K, P
- Maximum Depth of Cut: 0.197 in
- Rake: Negative
- Seat Size: 12
- Shape: Rhombic
Sandvik Coromant Turning Insert, Negative Basic Shape, Series: T-Max® P, CNMG Insert, C-80 deg Diamond, 5 mm Maximum Depth of Cut, 1/2 in Inscribed Circle, 0.1874 in Thickness, 0.5077 in Length, XM Chipbreaker, 0.0312 in Corner Radius, 0.2029 in Hole Dia, Manufacturer's Grade: 4325, ANSI Code: CNMG 432-XM 4325, ISO Code: CNMG 12 04 08-XM 4325, 80 deg Included Angle, 0 deg Relief Angle, Neutral Hand, Carbide, MTCVD Coated, Material Grade: P
- Features
| T8330 grade sub-micron substrate with a relatively high cobalt content |
| Nano-layered PVD coating with gradient transitions |
| Lower internal coating tension with higher hardness |
| Lower notch wear on the main cutting edge |
| Medium cutting speeds |
| Good operative reliability |
| Impaired machining conditions |
| 20 life cycle state |