Valenite Tiger-tec® Silver 7021236 Positive Single Sided Turning Insert, CCGT2(1.5)2-MM4 WSM01 ANSI, Rhombic, Carbide
CCGT Turning Inserts
PDW~12064861
MFG #: CCGT2(1.5)2-MM4WSM01
Walter (Valentine)
19.90000
/ ea
- ANSI Code: CCGT2(1.5)2-MM4 WSM01
- Catalog Number: CCGT2(1.5)2-MM4WSM01
- Corner Radius: 0.8 mm
- Country of Origin: DE
- Finish: PVD-TiAlN Coated
- Gross Weight Per Pack: 1 lb
- Hole Diameter: 2.8 mm
- Included Angle: 80 °
- ISO Code: CCGT060208-MM4 WSM01
- Relief Angle: 7 °
- Series: Tiger-tec® Silver
- Sub Brand: Tiger-tec®
- Thickness: 2.38 mm
- Stock Status: NONSTOCK
- Brand: Walter (Valentine)
- Manufacturer: Walter
- Chipbreaker: MM4
- Cutting Direction: Neutral
- For Use On: Stainless Steel, High Temperature Alloys and Titanium
- Inscribed Circle: 6.35 mm
- Insert Size: 2(1.5)2
- Insert Style: CCGT
- Manufacturer's Grade: WSM01
- Material: Carbide
- Material Grade: M, S
- Maximum Depth of Cut: 2 mm
- Rake: Positive
- Seat Size: 06
- Shape: Rhombic
VALENITE Tiger-tec® Silver Turning Insert, Positive Single Sided, CCGT Insert, Rhombic, 2 mm Maximum Depth of Cut, 6.35 mm Inscribed Circle, 2.38 mm Thickness, MM4 Chipbreaker, 0.8 mm Corner Radius, 2.8 mm Hole Dia, Manufacturer's Grade: WSM01, ANSI Code: CCGT2(1.5)2-MM4 WSM01, ISO Code: CCGT060208-MM4 WSM01, 80 deg Included Angle, 7 deg Relief Angle, Neutral Hand, Carbide, PVD Coated, Material Grade: M/P
- Features
| Longer tool life - excellent wear and fracture resistance |
| Prevents layer peeling - strong intra coating adhesion |
| Higher adhesion between each layer with improved crystal structure |
| Control chipping - higher layer strength |
| PQ chipbreaker - stable chip control in a wide feed rate range by breaking chips effectively |
| The well balanced edge sharpness and toughness |
| CA530 grade special tough substrate and tough coating film provides high stability and wear resistance |
| General to heavy interrupted machining (stability oriented) |
| +/-0.025 mm corner point tolerance |
| +/-0.13 mm thickness tolerance |
| +/-0.025 mm inscribed circle tolerance |
| 0.12 to 0.25 mm feed/rev |
| 6.448 mm cutting edge length |
| 11 deg rake |