Valenite Tiger-tec® Silver 6955644 Positive Single Sided Turning Insert, CCGT3(2.5)0.5-FN2 WNN10 ANSI, Rhombic
CCGT Turning Inserts
PDW~12583832
MFG #: CCGT3(2.5)0.5-FN2WNN10
Walter (Valentine)
20.90000
/ ea
- ANSI Code: CCGT3(2.5)0.5-FN2 WNN10
- Catalog Number: CCGT3(2.5)0.5-FN2WNN10
- Corner Radius: 0.2 mm
- Finish: Coated
- Gross Weight Per Pack: 1 lb
- Hand of Insert: Neutral
- Included Angle: 80 deg
- ISO Code: CCGT09T302-FN2 WNN10
- Relief Angle: 7 deg
- Sub Brand: Tiger-tec®
- Thickness: 3.97 mm
- Type: Positive Single Sided
- Stock Status: NONSTOCK
- Brand: Walter (Valentine)
- Manufacturer: Walter
- Chipbreaker: FN2
- Inscribed Circle: 9.525 mm
- Insert Style: CCGT
- Manufacturer's Grade: WNN10
- Material: Carbide
- Maximum Depth of Cut: 2 mm
- Shape: Rhombic
VALENITE Tiger-tec® Silver Turning Insert, Positive Single Sided, CCGT Insert, Rhombic, 2 mm Maximum Depth of Cut, 9.525 mm Inscribed Circle, 3.97 mm Thickness, FN2 Chipbreaker, 0.2 mm Corner Radius, Manufacturer's Grade: WNN10, ANSI Code: CCGT3(2.5)0.5-FN2 WNN10, ISO Code: CCGT09T302-FN2 WNN10, 80 deg Included Angle, 7 deg Relief Angle, Neutral Hand, Carbide, Coated
- Features
| FN2 Geometry - For finishing ISO N |
| Finishing insert with fully ground circumference |
| For low cutting forces |
| Polished rake face |
| For long, small diameter shafts with a tendency to vibrate |
| 40 to 60 deg double countersink hole |
| WNN10 - For roughing and finishing |
| Applicable on ISO N alloys, aluminum alloys, copper alloys and magnesium alloys |
| +/-0.025 mm corner point tolerance |
| +/-0.13 mm thickness tolerance |
| +/-0.025 mm inscribed circle tolerance |
| 0.05 to 0.12 mm feed/rev |
| 9.67 mm cutting edge length |
| 11 deg rake |