Maestro® Wireless® MRF2-600MTHW-WHC Multi-Location Digital Fade Dimmer With Wireless Controller, 120 VAC, 1 Pole, White
Wireless Controls
630053
MFG #: MRF2-600MTHW-WH
Lutron®
133.90000
/ ea
- Ballast Factor: 4.69 in (119 mm) x 2.94 in (75 mm)
- Catalog Number: MRF2-600MTHW-WH
- Control: Tap On/Off
- Country of Origin: MX
- Dimensions: 4-11/16 in H x 2-15/16 in W x 5/16 in D
- Finish: Gloss
- Frequency Rating: 60 Hz
- Gross Weight Per Pack: 0.6000 lb
- Lamp Type: Halogen/Incandescent
- Mounting Type: Surface
- Number Of Lamps: 1
- Power Rating: 600 W
- Series: Lutron
- Standards: UL Listed, CSA Certified, IC Certified, FCC Approved
- Start Type: UL, cUL, CSA, FCC, ICC
- Sub Brand: Maestro® Wireless®
- Temperature Rating: 0 to 40 °C
- Terminal Type: Screw
- Type: Multi-Location
- UNSPSC: 39122206
- UPC 11: 02755776789
- UPC 12: 02755776789
- Stock Status: NORMALLY STOCKED
- Brand: Lutron®
- Manufacturer: Lutron Electronics Co., Inc
- Amperage Rating: Plastic
- Color: White
- Operation Mode: Maestro Wireless
- Voltage Rating: 120 VAC
The Maestro Wireless solution incorporates Maestro Wireless load controls, wireless sensors, and wireless remote controls, which provides a system that delivers energy savings, convenience, and ease of installation. Maestro Wireless dimmers and switches use Lutron patented Clear Connect™ RF Technology, which enables wireless communication with Radio Powr Savr™ sensors and Pico® wireless controls for light control and general switched loads.
- Features
| Controls 600 W incandescent or halogen loads. Tap on to preset level; tap off. Tap twice for full on. Press, hold, and release for delayed fade-to-off. Touch rocker to adjust light level. Provides true dimming from each location with companion dimmers or Pico wireless remotes. |
| The Maestro Wireless solution provides dimming/ switching of multiple load types, occupancy/vacancy sensing, daylight harvesting, and high-end trim |
| Lutron patented Clear Connect RF Technology works through walls and floors |
| Incorporates advanced features such as fade on/ fade off, high-end trim, and rapid full on |
| Controls include Front Accessible Service Switch (FASSTM) for safe lamp replacement |
| Two-wire dimmers and switches available for retrofit applications |
| Power failure memory: If power is interrupted, the control will return to its previously set level prior to interruption |
| Relative humidity less than 90 percent non-condensing, Indoor use only Environmental Conditions |
| Wall Box mounting |