EcoSystem® PHPM-WBX-120-WH Power Module With 3-Wire Fluorescent Input, 120 VAC, 16 A, 12 AWG Wire Connection

Lighting Control Power Modules
509020 MFG #: PHPM-WBX-120-WH
Lutron®
374.90000 / ea
EcoSystem_PHPM_WBX_120_WH
  • Application: Lighting Control
  • Catalog Number: PHPM-WBX-120-WH
  • Color: White
  • Cooling: Air
  • Country of Origin: US
  • Dimensions: 5.1 in H x 6.3 in W
  • Enclosure: PLASTIC
  • Environmental Conditions: 0 to 40 degrees Celsius. Relative humidity less than 90% non-condensing. Indoor use only.
  • Frequency Rating: 50-60 Hz
  • Gross Weight Per Pack: 1.5000 lb
  • Height: 5.1 in
  • Input Voltage: 120 VAC
  • Insulation: Plastic
  • Length: 2.6 in
  • Mounting: Surface or recess
  • Output Voltage: 120 VAC
  • Standard: UL, RoHS, CSA, NOM, CIDET
  • Standards: UL Listed, CSA, NOM Certified
  • Sub Brand: EcoSystem®
  • Type: Power Module, phase-adaptive, with 3-wire fluorescent input
  • UNSPSC: 39121009
  • UPC 11: 02755762476
  • UPC 12: 027557624763
  • Width: 6.3 in
  • Stock Status: NONSTOCK
  • Brand: Lutron®
  • Manufacturer: Lutron Electronics Co., Inc
  • Amperage Rating: 16 A
  • Connection Type: 12 AWG Wire
  • Number of Wires: 3
  • Voltage Rating: 120 VAC
EcoSystem® Power Module, 120 VAC, 16 A, 12 AWG Wire, White, 5.1 in H x 6.3 in W
QTY
Add to Wishlist
  • Applications
  • Features
Lighting Control
When connected to a 20 A circuit breaker, provides capacity on a 3-wire fluorescent dimmer for a full 16 A load of lighting. May be used to dim incandescent, halogen, electronic low-voltage (ELV), magnetic low-voltage (MLV), neon/cold cathode, or Lutron Tu-Wire lighting sources. Phase adaptive technology automatically selects leading-edge or trailing-edge dimming for low-voltage transformers. Up to 3 power modules may be controlled by a single dimmer. Not for use with non-dim loads. Works with 120 VAC versions of Lutron 3-wire fluorescent dimmers, GRAFIK Eye QS and GRAFIK Eye 3000 Series control units. LP, LCP, and GP dimming panels, HomeWorks and HomeWorks QS remote power panels, and EcoSystem interface C5-BMJ-xxx.
When connected to a 20 A circuit breaker, provides capacity on a 3 wire fluorescent dimmer for a full 16 A load of lighting
Used to dim incandescent, halogen, electronic low voltage, magnetic low voltage, neon/cold cathode, Lutron® Tu-Wire® or Advance Mark X lighting sources
Phase adaptive technology automatically selects leading edge or trailing edge dimming for low voltage transformers
Up to 3 power modules may be controlled by a single dimmer
Not for use with non-dim loads
Surface or recess mount
Power module is UL tested and approved for use in air plenums
0 to 40 deg C ambient operating temperature
Relative humidity less than 90% non-condensing, indoor use only
1920 W capacity