Banner Engineering SM312LVW/30 Maxi-Beam® SM312 Photoelectric Sensor, Rectangle Shape, 5 m Sensing, Visible Red Sensing Beam
Photoelectric Retroreflective Sensors
13447
MFG #: SM312LV/W30
BANNER®
161.63000
/ ea
- Amperage Rating: 25m A
- Catalog Number: SM312LV/W30
- Connection: 9 MR Cable
- Country of Origin: USA
- Enclosure: IP67, NEMA 1, 2, 3, 3S, 4, 4X, 6, 12 And 13 Reinforced Thermoplastic Polyester
- Environmental Conditions: Relative Humidity: 90 PCT At 50 ° C (Non-Condensing)
- Gross Weight Per Pack: 1 lb
- Leakage Current: Off-State Output: Less Than 1 MICAMP
- Lens: Acrylic
- Operating Temperature: -20 To 70
- Size: 73.3 MM Length X 12.2 MM Width X 30.7 MM Height
- Standards: CE Marked, CSA Certified, cULus Listed
- Sub Brand: Mini-Beam
- Type: Self-Contained Non-Polarized Retroreflective Mode Photoelectric Sensor
- UNSPSC: 39121528
- UPC 11: 66248825876
- UPC 12: 66248825876
- Voltage Rating: 10 - 30 V
- Stock Status: NONSTOCK
- Brand: BANNER®
- Manufacturer: Banner Engineering Corp.
- Response Time: 1
- Sensing Beam: 650 NMTR Visible Red LED C
- Sensing Range: 5 A
Banner Engineering Maxi-Beam® Photoelectric Sensor, Series: SM312, Rectangle, Retro Reflective Sensing Method, 5 m Sensing Range, Visible Red Sensing Beam, 1 ms Response, Bi-Polar Output, 10/30 VDC, 25 mA, Cable, LED Light Source, 73.3 mm L x 12.2 mm W x 33.7 mm H, NEMA 1/2/3/3S/4/4X/6/12/IP67, -20 to 70 deg C Operating, Environmental Conditions: 90 Percent at 50 deg C
- Features
| Rectangular with M18 barrel housing style; Supply protection circuitry: Protected against reverse polarity and transient voltages; Output protection circuitry: Protected against false pulse on power-up and continuous overload or short-circuit of outputs; Industry standard mounting holes |
| Compact, modulated, self-contained retroreflective sensors |
| Switch-selectable for light operate or dark operate |
| Includes Banners exclusive AID™ alignment system, US patent number 4356393 |
| Highly repeatable 1 millisecond response |
| Rugged, epoxy-encapsulated, totally encapsulated, o-ring sealing, and stainless steel screws construction |
| Physically and electrically interchangeable with 18 mm barrel-type photoelectric |
| 15-turn slotted brass screw GAIN (sensitivity) adjustment potentiometer (clutched at both ends of travel), both controls are located on rear panel of sensor and protected by a gasketed, clear acrylic cover adjustments |
| Exclusive, patented alignment indicating device system (AID, US patent no 4356393) lights a rear-panel mounted red LED indicator whenever the sensor sees a light condition, with a superimposed pulse rate proportional to the light signal strength (the stronger the signal, the faster the pulse rate) |
| Industry standard mounting holes |
| Both sourcing and sinking outputs (150 mA max. each), continuous overload and short-circuit protected |
| Protected against false pulse on power-up and continuous overload or short-circuit of outputs |
| 18 mm barrel diameter |
| Self-contained non-polarized retroreflective mode photoelectric sensor |
| Less than 1 uA off-state output leakage, less than 25 mA |
| Sensors will respond to either a light or dark signal of 1 ms or longer duration, 500 Hz maximum |
| 650 nm visible red LED sensing beam |
| Acrylic lens, 90 percent at 50 deg C (non-condensing) relative humidity |
| 9m cable connection |
| Reinforced thermoplastic polyester enclosure |
| Light/dark operate, bipolar (NPN and PNP) output, 150mA maximum each output at 25 deg C, derated to 100 mA at 70 deg C, (PNP output) less than 1 V at 10 mA and less than 2 volts at 150mA, (NPN output) less than 200 mV at 10mA and less than 1 V at 150 mA output saturation voltage |