Banner Engineering S18SP6LPQ Ez-Beam® S18 Photoelectric Sensor, Barrel Shape, 2 m Sensing, Visible Red Sensing Beam, PNP Output
Photoelectric Retroreflective Sensors
13638
MFG #: S18SP6LPQ
BANNER®
115.04000
/ ea
- Amperage Rating: 30 mA
- Catalog Number: S18SP6LPQ
- Connection Type: Quick-Disconnect
- Country of Origin: USA
- Enclosure Type: NEMA 6P/IP69K
- Environmental Conditions: 90% at 50 deg C
- Gross Weight Per Pack: 0.0950 lb
- Light Source: LED
- Operating Temperature: -40 to 70 °C
- Sensing Method: Retro Reflective
- Series: S18
- Size: 18 mm Dia x 78 mm L
- Standards: CE Marked, cCSAus certified, cULus Listed, RoHS Complaint
- UNSPSC: 39121528
- UPC 11: 66248833450
- UPC 12: 66248833450
- Vibration: 10 to 60 Hz
- Voltage Rating: 10 to 30 VDC
- Stock Status: NORMALLY STOCKED
- Brand: BANNER®
- Manufacturer: Banner Engineering Corp.
- Output Type: PNP
- Response Time: 3 ms
- Sensing Beam: Red Laser
- Sensing Range: 2 m
- Shape: Barrel
Banner Engineering Ez-Beam® Photoelectric Sensor, Series: S18, Barrel, Retro Reflective Sensing Method, 2 m Sensing Range, Visible Red Sensing Beam, 3 ms Response, PNP Output, 10 to 30 VDC, 30 mA, Quick Disconnect, LED Light Source, 10 to 60 Hz, 18 mm Dia x 78 mm L, NEMA 6P/IP69K, -40 to 70 deg C Operating, Environmental Conditions: 90% at 50 deg C
- Features
| Barrel housing style; Featuring EZ-BEAM technology for reliable sensing without the need for adjustments; Completely epoxy-encapsulated to provide superior durability, designed to meet rigorous IP69K standards for use in 1200 PSI washdowns; Innovative dual-indicator system for simple sensor performance monitoring; Advanced diagnostics to warn of marginal sensing conditions or output overload; Protected against reverse polarity and transient voltages; Protected against false pulse on power-up and continuous overload or short circuit of outputs |
| Self-contained polarized retroreflective mode photoelectric sensor |
| Less than 1 uA at 30 VDC off-state output leakage |
| 3 ms on/off response time |
| 680 nm visible red LED sensing beam |
| Acrylic lens, 90 percent at 50 deg C (non-condensing) relative humidity |
| 4-pin euro-style quick disconnect connection |
| Thermoplastic polyester housing |
| 150 mA maximum (each) in standard wiring, less than 1 V at 10 mA DC, less than 1.5 V at 150 mA DC |
| Light/dark operate, complementary PNP |
| Featuring EZ-Beam technology to provide reliable sensing without the need for adjustments |
| Completely epoxy-encapsulated barrel-mount sensors operate on dc supply voltage and withstand harsh sensing environments |
| Advanced diagnostics to warn of marginal sensing conditions or output overload |
| Available in opposed, retroreflective, diffuse and fixed-field modes; Innovative dual-indicator system takes the guesswork out of sensor performance monitoring |
| 2 green and yellow LED indicators, green on steady - power to sensor is on, green flashing - output is overloaded, yellow on steady - N.O. output is conducting , yellow flashing - excess gain marginal (1 - 1.5x) in light condition |
| Protected against reverse polarity and transient voltages |
| Protected against false pulse on power-up and continuous overload or short circuit of outputs |
| 10 - 60 Hz maximum, double amplitude 0.06 in, maximum acceleration 10g vibration |
| 18 mm barrel diameter |
| Self-contained |