Banner Engineering EZ-SCREEN® SLSP30-900Q88 Safety Light Screen Pair, 35.4 mm H Protected, 0.1 to 18 m Operating Range

Safety Light Curtains
164087 MFG #: SLSP30-900Q88
BANNER®
2922.26000 / ea
Banner_EZ_SCREEN_SLSP30_450Q88
  • Aperture Angle: +/-2.5 °
  • Catalog Number: SLSP30-900Q88
  • Country of Origin: USA
  • Enclosure Type: IP65
  • Finish: Polyester Powder Coated
  • Gross Weight Per Pack: 1 lb
  • Housing Material: Aluminum
  • Light Source: Infrared LED
  • Mounting Type: Bracket
  • Output Current: 100/275 mA
  • Power Supply: 100 mA
  • Reset Type: High/Low Signal
  • Response Time: 19 ms
  • Safety Output Rating: 2 PNP
  • Standards: CE Marked, RoHS Complaint
  • Storage|Operating Temperature: 0 to 55 °C
  • Supply Voltage: 24 VDC
  • UNSPSC: 32151804
  • UPC 11: 66248872392
  • UPC 12: 66248872392
  • Stock Status: NONSTOCK
  • Brand: BANNER®
  • Manufacturer: Banner Engineering Corp.
  • Number of Beams: 60
  • Operating Range: 0.1 to 18 m
  • Overall Height: 35.4 mm
  • Protected Height: 35.4 mm
Banner Engineering EZ-SCREEN® Safety Light Screen Pair, 35.4 mm Protected Height, 0.1 to 18 m Operating, 60 Beam, 35.4 mm Overall Height, 19 ms Response, +/-2.5 deg Aperture Angle, Infrared LED Light Source, 24 VDC Supply Voltage, 2 PNP Safety Output Rating, 100 mA Supply, 100/275 mA Output, High/Low Signal Reset, Aluminum Housing, Polyester Powder Coated, IP65, 0 to 55 deg C, Bracket Mount
QTY
Add to Wishlist
  • Features
An optoelectronic safeguarding device; Easily configured reduced resolution (floating blanking); Three digit display provides diagnostic information and indicates the number of beams blocked; Zone indicator identify blocked beams; Receiver LED's provide system status and emitter/receiver alignment indications; Highly immune to EMI, RFI, ambient light, weld flash and strobe light; Two-piece design with external device monitoring; Vibration-tolerant, factory burned-in emitter and receiver circuitry for toughness and dependability; Safety PLC input compatible (per OSSD specifications); FMEA tested to ensure control reliability; All inputs and outputs are protected from short circuits to 24 VDC or DC common; 95 PCT maximum relative humidity (non-condensing) relative humidity; Output signal switching devices: Two redundant solid state 24 VDC, 0.5 AMP max s
An optoelectronic safeguarding device
Easily configured reduced resolution (floating blanking)
Three digit display provides diagnostic information and indicates the number of beams blocked
Zone indicator identify blocked beams
Receiver LED's provide system status and emitter/receiver alignment indications
Highly immune to EMI, RFI, ambient light, weld flash and strobe light
Two-piece design with external device monitoring
Vibration-tolerant, factory burned-in emitter and receiver circuitry for toughness and dependability
Safety PLC input compatible (per OSSD specifications)
FMEA tested to ensure control reliability
All inputs and outputs are protected from short circuits to 24 VDC or DC common
95 PCT maximum relative humidity (non-condensing) relative humidity
Output signal switching devices Two redundant solid state 24 VDC, 0.5 AMP max sourcing OSSD (Output Signal Switching Device) safety outputs, on-state voltage greater than or equal to Vin - 1.5 VDC, off-state voltage 1.2 VDC max (0 -1.2 VDC), max load capacitance 1 MFD, max load inductance 10 H, leakage current 0.5 mA maximum, cable resistance 10 OHM maximum, OSSD test pulse width 100 - 300 MICSEC, OSSD test pulse period 10 - 27 MICSEC (varies with number of beams), switching current 0 - 0.5 AMP
2 PNP (trip/latch) safety output rating
24 VDC at 100 mA maximum emitter, 24 VDC at 275 mA maximum receiver power supply
Black Zinc 8 GA Cold-Rolled Steel Swivel End-Mounting Bracket Pair mounting
M12
30 mm resolution
850 NMTR infrared LED light source
Plus/minus 2.5 deg at 3 m. Yellow polyester powder