Banner Engineering EZ-SCREEN® SLSP30-900Q88 Safety Light Screen Pair, 35.4 mm H Protected, 0.1 to 18 m Operating Range
Safety Light Curtains
164087
MFG #: SLSP30-900Q88
BANNER®
2922.26000
/ ea
Banner Engineering EZ-SCREEN® Safety Light Screen Pair, 35.4 mm Protected Height, 0.1 to 18 m Operating, 60 Beam, 35.4 mm Overall Height, 19 ms Response, +/-2.5 deg Aperture Angle, Infrared LED Light Source, 24 VDC Supply Voltage, 2 PNP Safety Output Rating, 100 mA Supply, 100/275 mA Output, High/Low Signal Reset, Aluminum Housing, Polyester Powder Coated, IP65, 0 to 55 deg C, Bracket Mount
- bannerengineering.com(Seller Home Page URL)
- Install Instructions URL - INS_112852.pdf(Install Instructions URL)
- Spec Sheet URL - SPE_112852.pdf(Spec Sheet URL)
- Tech Drawing URL - Banner_EZ_SCREEN_SLSP30_900Q88_Technical_Drawing.pdf(Tech Drawing URL)
- Warranty URL - WAR_product-warranty.pdf(Warranty URL)
- Features
| An optoelectronic safeguarding device; Easily configured reduced resolution (floating blanking); Three digit display provides diagnostic information and indicates the number of beams blocked; Zone indicator identify blocked beams; Receiver LED's provide system status and emitter/receiver alignment indications; Highly immune to EMI, RFI, ambient light, weld flash and strobe light; Two-piece design with external device monitoring; Vibration-tolerant, factory burned-in emitter and receiver circuitry for toughness and dependability; Safety PLC input compatible (per OSSD specifications); FMEA tested to ensure control reliability; All inputs and outputs are protected from short circuits to 24 VDC or DC common; 95 PCT maximum relative humidity (non-condensing) relative humidity; Output signal switching devices: Two redundant solid state 24 VDC, 0.5 AMP max s |
| An optoelectronic safeguarding device |
| Easily configured reduced resolution (floating blanking) |
| Three digit display provides diagnostic information and indicates the number of beams blocked |
| Zone indicator identify blocked beams |
| Receiver LED's provide system status and emitter/receiver alignment indications |
| Highly immune to EMI, RFI, ambient light, weld flash and strobe light |
| Two-piece design with external device monitoring |
| Vibration-tolerant, factory burned-in emitter and receiver circuitry for toughness and dependability |
| Safety PLC input compatible (per OSSD specifications) |
| FMEA tested to ensure control reliability |
| All inputs and outputs are protected from short circuits to 24 VDC or DC common |
| 95 PCT maximum relative humidity (non-condensing) relative humidity |
| Output signal switching devices Two redundant solid state 24 VDC, 0.5 AMP max sourcing OSSD (Output Signal Switching Device) safety outputs, on-state voltage greater than or equal to Vin - 1.5 VDC, off-state voltage 1.2 VDC max (0 -1.2 VDC), max load capacitance 1 MFD, max load inductance 10 H, leakage current 0.5 mA maximum, cable resistance 10 OHM maximum, OSSD test pulse width 100 - 300 MICSEC, OSSD test pulse period 10 - 27 MICSEC (varies with number of beams), switching current 0 - 0.5 AMP |
| 2 PNP (trip/latch) safety output rating |
| 24 VDC at 100 mA maximum emitter, 24 VDC at 275 mA maximum receiver power supply |
| Black Zinc 8 GA Cold-Rolled Steel Swivel End-Mounting Bracket Pair mounting |
| M12 |
| 30 mm resolution |
| 850 NMTR infrared LED light source |
| Plus/minus 2.5 deg at 3 m. Yellow polyester powder |