Banner Engineering SM312FPQD SM312 Fiber Optic Sensor, Rectangle Shape, Visible Red Sensing Beam, 1 ms Response Time
Fiber Optic Block Style Sensors
13513
MFG #: SM312FPQD
BANNER®
153.07000
/ ea
- Catalog Number: SM312FPQD
- Connection Type: 4-Pin M12 Quick Disconnect
- Country of Origin: USA
- Enclosure Type: NEMA 1/2/3/3S/4/4X/6/12/IP67
- Environmental Conditions: 90% at 50 deg C Maximum Relative Humidity
- Gross Weight Per Pack: 0.1950 lb
- Light Source: LED
- Operating Temperature: -20 to 70 °C
- Sensing Method: Plastic Fiber Optic
- Series: SM312
- Standards: CE Marked, CSA Approval, UL Approval
- UNSPSC: 39121528
- UPC 11: 66248826837
- UPC 12: 66248826837
- Voltage Rating: 10 to 30 VDC
- Stock Status: NORMALLY STOCKED
- Brand: BANNER®
- Manufacturer: Banner Engineering Corp.
- Output Type: Single Discrete NPN/PNP
- Response Time: 1 ms
- Sensing Beam: Red Laser
- Shape: Rectangular
Banner Engineering Fiber Optic Sensor, Series: SM312, Rectangle, Plastic Fiber Optic Sensing Method, Visible Red Sensing Beam, 1 ms Response, Single Discrete NPN/PNP Output, 10 to 30 VDC, 4-Pin M12 Quick Disconnect, LED Light Source, NEMA 1/2/3/3S/4/4X/6/12/IP67, -20 to 70 deg C Operating, Environmental Conditions: 90% at 50 deg C Maximum Relative Humidity
- bannerengineering.com(Seller Home Page URL)
- Compliance Cert URL - Banner_SM2A30PRLQD_Compliance_Certificate.pdf(Compliance Cert URL)
- Spec Sheet URL - SPE_03370.pdf(Spec Sheet URL)
- Tech Drawing URL - DRW_154450_pdf.pdf(Tech Drawing URL)
- Spec Sheet 1 URL - Banner_SM312FQD_Specification_Sheet_1.pdf(Spec Sheet 1 URL)
- Install Instructions URL - Banner_SM312F_W_30_Installation_Instructions.pdf(Install Instructions URL)
- Warranty URL - WAR_product-warranty.pdf(Warranty URL)
- Features
| Compact, modulated, highly repeatable sensors; Switch-selectable for light operate or dark operate; Includes banner's exclusive AID™ alignment system; Sensing range varies by sensing mode and fiber optics used; Rugged, epoxy-encapsulated, totally encapsulated, O-ring sealing, and stainless steel screws construction; Physically and electrically interchangeable with 18 MM barrel-type photoelectric; Protected against reverse polarity, transient voltages and against false pulse on power-up and continuous overload or short-circuit of outputs; Controls are located on rear panel of sensor and protected by a gasketed, clear acrylic cover; The NPN (current sinking) output of DC MINI-BEAM sensors is directly compatible as an input to banner logic modules, including all non-amplified MAXI-AMP and MICRO-AMP modules, MINI-BEAMs are TTL compatible |
| Thermoplastic primary housing material |
| 300 us repeatability |
| Gain (sensitivity) adjustment screw |
| Alignment indicator device |
| Light/dark operate select switch |
| Clockwise light operate (outputs conduct when sensing light is received) |
| Counter clockwise dark operate (outputs conduct when sensing light is not received) |
| 4-pin M12/euro style quick disconnect cable connection |
| Potentiometer adjustment |
| 100 ms delay at power-up |
| 4-pin M12 integral quick disconnect cable connection |