nVent HOFFMAN E10PBAM PB1 Sloped Front Pushbutton Enclosure, 7-1/4 in L x 13 in W x 6-3/4 in D, 10 Outlets, NEMA 12/IP65 NEMA Rating, Steel
Pushbutton Enclosures
292814
MFG #: E10PBAM
nVent HOFFMAN
367.92000
/ ea
nVent HOFFMAN Pushbutton Enclosure, Sloped Front, Series: PB1, 7-1/4 in Length, 13 in Width, 6-3/4 in Depth, NEMA 12/IP65, Hinged Cover, 10 Outlets, Panel Mount, Steel, ANSI 61 Polyester Powder Painted, Gray
- http://www.hoffmanonline.com(Seller Home Page URL)
- Install Instructions 1 URL - 11015_9KDB1L2EVXUOW584.pdf(Install Instructions 1 URL)
- Install Instructions 1 URL - 23155002.pdf(Install Instructions 1 URL)
- Spec Sheet 1 URL - Hoffman_E10PBA_Specification_Sheet.pdf(Spec Sheet 1 URL)
- Spec Sheet URL - Spec-00006.pdf(Spec Sheet URL)
- Tech Drawing URL - C2665-C.gif(Tech Drawing URL)
- Warranty URL - terms-of-sale(Warranty URL)
- Applications
- Features
| Controls and Drives |
| 14 gauge steel, Seams continuously welded and ground smooth, Captivated cover screws thread into sealed wells, Bonding provision on cover, Grounding stud on body, Oil-resistant gasket, Factory stAed 4-way pushbutton holes , Enclosures 7.25 x 6.25 x 6.75 in. (184 x 159 x 171 mm) and larger have internal detachable hinge to hold cover open during wiring , External mounting brackets, 30.5-mm or 22.5-mm size holes |
| Seams continuously welded and ground smooth |
| Captivated cover screws thread into sealed wells |
| Grounding nut in body of enclosure |
| Bonding provision on cover |
| Oil-resistant gasket |
| Factory stamped 4-way pushbutton holes |
| External mounting brackets |
| Enclosures 7-1/4 x 6-1/4 x 6-3/4 in (184 x 159 x 171 mm) and larger have internal detachable hinge to hold cover open during wiring, yet permit immediate removal |
| 14 ga steel body |
| 7.78 in L x 13.22 in W overall dimension |
| 14 ga steel |
| ANSI 61 gray polyester powder paint inside and out |