Banner Engineering T30UXDCQ8 ultrasonic sensor with extended range and built-in temperature compensation
Ultrasonic Reflex-Reflective - Block
494440
MFG #: T30UXDCQ8
BANNER®
386.95000
/ ea
The U-GAGE® T30UX is an easy-to-use ultrasonic sensor with extended range and built-in temperature compensation. Simple push button configuration provides flexibility for a variety of applications. Easy-to-see indicator LEDs communicate the status of the sensor. The Green "Power" LED ON indicates that the sensor is in Run Mode (the sensor's normal operating condition). The Red "Signal" LED indicates the target signal strength. The Amber "Output" LED indicates that the output is enabled and the sensor is receiving a signal within the window limits (depending on NO or NC). The Amber "Mode" LED indicates the currently selected mode.
- Features
Built-in temperature compensation |
Fast, easy-to-use Teach-mode programming, no potentiometer adjustments |
Remote teach for security and convenience |
Compact, self-contained, right-angle sensor package with fully encapsulated electronics |
SPST solid-state switch, configurable as NPN (sinking) or PNP (sourcing) via Mode push button, normally open (NO) or normally closed (NC) operation is also selectable via mode push button |
Protected against reverse polarity and transient overvoltage's |
Protected against short circuit conditions |
PBT polyester housing, polyester push buttons, epoxy/ceramic composite transducer |
30 mm diameter barrel housing |
Time of flight sensing mode |
Teach button adjustments |
Clear object detection |
0.1% of distance (1.5 mm minimum) discrete repeatability |
500 ms delay at power-up |
0.02% of sensing distance/deg C temperature effect |
30G 11 ms duration, half sine wave mechanical shock |
<1.6 V at 100 mA NPN/<3 V at 100 mA PNP output saturation voltage |
100 mA maximum discrete (switched) output |
45 ms rep rate |
55 kOhm remote teach and laser control input impedance |