3M™ 5515A Cold Shrink QS-III Splice Kit, 15 kVAC, 500 kcmil Conductor, 32 in L Splice, Silicon Rubber
Insulated Splice Kit, 15 kV
480222
MFG #: 7100002401
3M™
1020.68000
/ ea
- Alternate Catalog Number: 5515A-500-CU
- ARRA Compliant: X
- Buy American Compliant: X
- Cable Type: Longitudinally Corrugated (LC); Tape Shield; UniShield(R); Wire Shield
- Catalog Number: 7100002401
- Conductor Material: Copper
- Connector: 10014
- Country of Origin: US
- Currency: USD
- EU RoHS Indicator: C
- Expiry|Spoilage Date Applicable Indicator: Y
- Gross Weight Per Pack: 9.1000 lb
- Gross Weight per Pack Metric: 4.13
- Gross Weight UOM Metric: kg
- Harmonization Tariff Schedule Code: 8546900000
- Height: 8.30 in
- Height [Metric]: 21.0820 cm
- Length: 25.70 in
- Length [Metric]: 65.2780 cm
- Number Of Conductors: 1
- Returnable: Y
- Standards: IEEE 404 Requirements
- Type: Inline
- UNSPSC: 39120000
- UPC 11: 05400742136
- UPC 12: 054007421368
- Width: 7.70 in
- Width [Metric]: 19.5580 cm
- Stock Status: NONSTOCK
- Brand: 3M™
- Manufacturer: 3M™
- Conductor Size: 500 kcmil
- Voltage Rating: 15k V
3M 5515A Series Cold Shrink QS-III Splice Kit is a 15kV class inline splice designed to join tape shield, wire shield, UniShield® or longitudinally corrugated shielded power cables. The cold shrink design fits type MV-90 cables with copper or aluminum conductors while ensuring a quick installation and excellent cable size transitions. The kit is 15,000 amps-rated for faults current protection.
- Brochure URL - 11579_R2F9PC3ZYODNAM4W.pdf(Brochure URL)
- Compliance Cert URL - Scotch_054007_10083_Compliance_Certificate.pdf(Compliance Cert URL)
- http://www.3m.com(Seller Home Page URL)
- Install Instructions 1 URL - 11579_KCO72TRGL9MUAZS5.pdf(Install Instructions 1 URL)
- Install Instructions URL - qs-iii-5515a.pdf(Install Instructions URL)
- Safety Data Sheet URL - kfb2uevmdcjh79xt2kyi.pdf(Safety Data Sheet URL)
- Spec Sheet URL - 11579_8KUQH9GDJSCTX0MY.pdf(Spec Sheet URL)
- Tech Drawing URL - 11579_ID-DRW-v1-78-8125-9892-4.pdf(Tech Drawing URL)
- Features
| In-line splice for joining tape shield, wire shield, UniShield® or longitudinally corrugated shielded power cables |
| Special electrode design of the kit reduces the electrical stress at a critical cable/splice interface |
| Designed for feeder and distribution circuits, it transitions from shielded to neutral power cables and fits type MV-90 cables |
| Silicon rubber-splice body provides good high and low temperature performance, and the EPDM rubber jacket offers physical protection |
| Factory tested partial discharge and AC ensure reliability |
| Copper conductor |
| 0.8 in - 1.84 in connector OD |
| 6.75 in aluminum/copper compression length, 7.5 in copper compression length, 6.93 in shearbolt connector length |
| 1090 PSI tensile strength |
| 610% elongation |
| 370 V/mil dielectric strength |
| 1/Case |