3M™ QSLV-M Low Voltage Cold Shrink Quick Insulator, 0.4 in Min Dia, 1.6 in Max Diameter, 2-1/2 in L, 1400 psi Tensile

Heat Shrink Tubing Connector Insulators
476086 MFG #: 7000058805
63.23000 / ea
  • Alternate Catalog Number: QSLV-M(2-500)
  • ARRA Compliant: X
  • Buy American Compliant: X
  • Catalog Number: 7000058805
  • Color: Black
  • Country of Origin: US
  • Currency: USD
  • Dielectric Strength: 365 V/mil
  • Elongation: 7.5
  • EU RoHS Indicator: Y
  • Expiry|Spoilage Date Applicable Indicator: Y
  • Gross Weight Per Pack: 6.4000 lb
  • Gross Weight per Pack Metric: 2.90
  • Gross Weight UOM Metric: kg
  • Harmonization Tariff Schedule Code: 8546900000
  • Height: 6.70 in
  • Height [Metric]: 17.0180 cm
  • Length [Metric]: 41.8084 cm
  • Material Composition Declaration: RoHS 2011/65/EU compliant without exemption
  • Returnable: Y
  • Series: QSLV-M
  • Standards: ARRA CompliantBuy American Act CompliantRoHS CompliantANSI C119.1
  • Type: Low Voltage Splice
  • UNSPSC: 32000000
  • UPC 11: 05112857237
  • UPC 12: 051128572375
  • Width: 11.88 in
  • Width [Metric]: 30.1752 cm
  • Stock Status: NONSTOCK
  • Brand: 3M™
  • Manufacturer: 3M™
  • Length: 16.46 in
  • Material: EPDM
  • Maximum Diameter: 1.6 in
  • Minimum Diameter: 0.4 in
  • Tensile Strength: 1400 psi
3M™ Cold Shrink Quick Splice low voltage QSLV-M are open-ended tubular rubber sleeves with sealing mastic on each end which are factory expanded and assembled onto a unique three-core system. Two cores, oneon each end, are removed after the QSLV-M insulator has been centered over an inline connector, allowing the ends of the tube to shrink and form a water resistant seal. The third, center segment of the core remains inside the cold shrink tube, acting as a support structure. Sizing of the cores and tube, along with the sealing mastic on each end, is designed to accommodate the variance in connectors and connector crimping techniques and final dimensions without degrading the seal and insulating characteristics of the EPDM rubber tube, while making core removal easy. Two diameter sizes will cover a range of 1000 volt or less cable from 8 AWG through 500 kcmil, copper and aluminum conductors with crimped connectors.
  • Features
Low voltage single conductor insulated cable
1 kV voltage rating
Simple hand installation, no tools required
No heat source
Accommodates wide range of cable sizes, including street lighting
Excellent wet electrical properties
Good thermal stability during storage and shipping
Seals tight, retains resiliency and pressure, even after years of aging and exposure
Resists acids and alkalis
Water resistant
2 AWG - 1000 kcmil (Cu), 2 AWG - 500 kcmil (Al) conductor size
0.4 - 1.6 in cable insulation outer Dia