Fluke® 80K-40 High Voltage Current Probe, 40000 VAC
Test Probes
393197
MFG #: 80K-40
Fluke®
342.99000
/ ea
- Alternate Catalog Number: 382846
- Application: Extend the voltage measuring capability of an AC/DC voltmeter to 40,000 volts peak AC or DC Overvoltage Category I
- ARRA Compliant: C
- Buy American Compliant: C
- Catalog Number: 80K-40
- Color: Black/Red
- Country of Origin: US
- Currency: USD
- Diameter: 1/2 in
- Enclosure: Hard plastic
- EU RoHS Indicator: U
- Gross Weight Per Pack: 2.1000 lb
- Gross Weight per Pack Metric: 0.95
- Gross Weight UOM Metric: kg
- Harmonization Tariff Schedule Code: 9030908922
- Height: 2.76 in
- Height [Metric]: 7.0104 cm
- Length [Metric]: 46.9900 cm
- Material: Plastic/Steel
- Measuring Range: 40000 V
- Model: Fluke 80K 40
- Standards: ARRA CompliantBuy American Act CompliantECCN EAR99PROP65: This product is in compliance with Prop65; it is not known to contain any chemicals associated with this regulation
- Tip Material: Steel
- Type: Current Probe
- UNSPSC: 41111905
- UPC 11: 09596900112
- UPC 12: 095969001120
- Width: 6.50 in
- Width [Metric]: 16.5100 cm
- Stock Status: NONSTOCK
- Brand: Fluke®
- Manufacturer: Fluke Corporation
- Amperage Rating: 40 kV dc or, peak ac, 28 kV rms ac
- Length: 18.50 in
- Safety Rating: CAT I
- Voltage Rating: 40 kVDC/peak AC, 28 VRMs
The 80K-40 is a high voltage probe designed to extend the voltage measuring capability of an AC/DC voltmeter to 40,000 volts peak AC or DC Overvoltage Category I.
- http://www.fluke.com(Seller Home Page URL)
- http://www.fluke.com/(Seller Home Page URL)
- Install Instructions URL - ID-INS-3140R.pdf(Install Instructions URL)
- Owners Manual URL - 11095_A3VZERP14628XTIC.jpg(Owners Manual URL)
- Owners Manual URL - IDW_DOCUMENT_1520614401226.pdf(Owners Manual URL)
- Spec Sheet URL - 11095_80K-40.pdf(Spec Sheet URL)
- Spec Sheet URL - 80k40___iseng0900.pdf(Spec Sheet URL)
- Tech Drawing URL - 80k-40_c_nr-1655-1500x1000(Tech Drawing URL)
- Applications
- Features
Extend the voltage measuring capability of an AC/DC voltmeter to 40,000 volts peak AC or DC Overvoltage Category I |
High voltage probe designed to extend the voltage measuring capability of an AC/DC voltmeter to 40000 V peak AC or DC overvoltage category I |
Can only be used to make measurements on energy limited circuits within equipment |
Do not use this probe to measure high voltages on power distribution systems |
Probe provides high accuracy when used with a voltmeter having 10 Mohm input impedance |
Accuracy 20 kV to 35 kV - +/-1% at 20 deg C to 30 deg C, add 1% at 10 deg C <20 deg C and >30 deg C to 45 deg C, (for total measurement accuracy add accuracy specification of voltmeter being used) 0 kV to <20 kV |
1000:1 division ratio |
Unusually high input impedance offered by these resistors minimizes circuit loading and thereby, optimizes measurement accuracy |
Intended for low energy applications only |