- Application: For punching conduit sized holes in mild steel, aluminum, fiberglass, and plastic.
- ARRA Compliant: Y
- Buy American Compliant: X
- Catalog Number: 7212SP-1D
- Country of Origin: US
- Currency: USD
- EU RoHS Indicator: U
- Finish: Nickel Plated
- Gross Volume Per Pack: 64.00
- Gross Volume per Pack Metric: 1048.77
- Gross Weight Per Pack: 0.8900 lb
- Gross Weight per Pack Metric: 0.40
- Harmonization Tariff Schedule Code: 8207303020
- Height: 2.00
- Height [Metric]: 5.0800
- Length: 8.00
- Length [Metric]: 20.3200
- Size: 1 in
- Standards: ARRA Compliant
- Sub Brand: SPEED PUNCH?®
- Suitable For Use With: Speed Punch® Knockout Punch, QUICK DRAW® 7704SB Flex Driver, 7804SB Standard Driver, 7904SB 90 deg Driver, Slug-Buster® SC® 746 Hydraulic Ram with 7212SP12 Long Draw Stud and LS50L11A LS50 Battery Powered Driver
- Type: Replacement Die for SPEED PUNCH® Knockout Punches
- UNSPSC: 27111505
- UPC 11: 78331009280
- UPC 12: 78331009280
- Width: 4.00
- Width [Metric]: 10.1600
- Stock Status: NONSTOCK
- Brand: Greenlee®
- Manufacturer: Greenlee Textron
- Gauge: 10 ga
- Knockout Inner Diameter: 1.362 in
- Material: Carbon Steel
Greenlee® SPEED PUNCH™ Knockout Punch, 1 in, Steel, 10 ga, For Use With: 7704SB Quick Draw® Flex, 7804SB Quick Draw® Standard, 7904SB Quick Draw® 90 and 746 with 7212SP12 Long Draw Stud Hydraulic Ram, or LS50, LS50L11A Battery Powered Greenlee® Hydraulic Driver, Nickel Plated
- Catalog URL - IDW_DOCUMENT_1479245027976.pdf(Catalog URL)
- http://www.greenlee.com/(Seller Home Page URL)
- Install Instructions URL - IDW_DOCUMENT_1520618634148.pdf(Install Instructions URL)
- Safety Data Sheet URL - ?f05bad6d-5855-11e4-bc08-c81f66f24c6b(Safety Data Sheet URL)
- Spec Sheet URL - 11142_ID-SPE-v1-kb6cmpbvmvheiaglm3rr.pdf(Spec Sheet URL)
- Video - https://youtube.com/embed/bcLl1_o9hcc(Video)
- Applications
- Features
| For punching conduit sized holes in mild steel, aluminum, fiberglass, and plastic. |
| Speed Punch® saves time and money with every hole |
| Up to 3X faster set up and disassembly |
| No thread punch design eliminates cross threading |
| 7/8 in minimum pilot hole |
| No-Thread punch design eliminates cross-threading |
| Use with manual-hydraulic and battery hydraulic knockout drivers |
| 1.362 in Hole |
| Made of Carbon Stee |