Weg Electric 00318ET3E182T-W22 3HP PREMIUM
General Purpose Motor AC
607431
MFG #: 00318ET3E182T-W22
WEG
530.40000
/ ea
- Application: Industrial Application
- Base: Rigid
- Bearing: Ball
- Catalog Number: 00318ET3E182T-W22
- Frequency Rating: 60 Hz
- Insulation Class: F
- Returnable: Y
- Rotation: CW/CCW
- Service Factor: 1
- Shaft Size: 1-1/8 in
- Standard: NEMA MG-1
- Type: Electric Motor
- UPC 11: 91327760851
- UPC 12: 91327760851
- Stock Status: NORMALLY STOCKED
- Brand: WEG
- Enclosure: IC411 - TEFC
- Frame: 182/4T
- Full Load Current: 8.65 - 7.82/3.91 A
- Horsepower: 3 hp
- Mounting: Foot Mount
- Phase: 3
- Speed Rating: 1760 rpm
- Torque Rating: 8.83 ft-lb
- Voltage Rating: 208-230 V;460 V
WEG is a 3 phase electric motor with diameter of 1-1/8 in, 3 hp and its speed rating is 1760 RPM
- Install Instructions 1 URL - US_MT(Install Instructions 1 URL)
- Seller Home Page URL - institutional(Seller Home Page URL)
- Video - https://www.youtube.com/embed/XIYTtDC9KLQ&list=PLY5C77B7EOW_BzGxZPKBVCAR3RReyIP7P&index=25(Video)
- Warranty URL - WEG-Standard-Warranty-Terms-(LV-Motors).pdf(Warranty URL)
- Applications
- Features
Industrial Application |
Complies with NEMA Premium efficiency level and carry CSA Certified for Division 2 on the Name Plate as standard. |
With cast iron frame, flexible mounting, solid feet, and lower noise levels and operating temperatures, the W22 motors are perfectly suitable for a great variety of industrial applications. Complies with NEMA Premium efficiency level and carry CSA Certified for Division 2 on the Nameplate as standard. |
- Dual rated for 60 Hz and 50 Hz @ 190-220/380-415 V |
- Optimized ventilation system for cooler operation |
- Robust feet design for the toughest applications |
- Frames 182/4T and larger have two eyebolts for easy mounting in any position |
- Oversized diagonally split aluminum terminal box that exceeds IP55 requirements (Ideal for easy installation and tough environments) |
- Terminal box is rotatable in 90 degrees increments for easy installation |
- AEGIS® ring inside (optional) to extend bearing life when used with VFDs |
- IP55 ingress protection is standard |
- Suitable for VFD operation per NEMA MG1 part 31.4.4.2 |
- Color coded leads for easy installation |
- Motor paint resistance exceeds 500 hours of salt spray test |