Sandvik Coromant 5759463 CoroMill® 345 Face Milling Cutter, 3.1496 in Cutting, 2.4803 in Shank, 4.2519 in OAL, 345..Cx Insert, 0.2362 in Max Depth of Cut
Indexable Face Mills
1083806
MFG #: 5759463
Sandvik Coromant
1217.20000
/ ea
- Alternate Catalog Number: 345-080C6-13M
- ANSI Code: 345-080C6-13M
- Catalog Number: 5759463
- Country of Origin: SE
- Gross Weight Per Pack: 5.4100 lb
- ISO Code: 345-080C6-13M
- Item Group: 455
- Lead Angle: 45 °
- Material: Steel
- Series: CoroMill® 345
- Standards: ISO 26623-1
- UPC 11: 69826247525
- UPC 12: 69826247525
- Stock Status: NONSTOCK
- Brand: Sandvik Coromant
- Manufacturer: Sandvik Coromant
- Arbor Hole Diameter: 2.4803 in
- Cutting Angle: 45 °
- Cutting Diameter: 3.1496 in
- Cutting Direction: Right Hand
- Insert Compatibility: 345R-13T5
- Insert Style: 345..Cx
- Maximum Depth of Cut: 0.2362 in
- Number of Inserts: 6
- Overall Length: 4.2519 in
- Shank Diameter: 2.4803 in
- Shank Type: Coromant Capto®
- Through Coolant: Yes
Sandvik Coromant Face Milling Cutter, Series: CoroMill® 345, 3.1496 in Cutting Dia, 4.2519 in Overall Length, 0.2362 in Maximum Depth of Cut, 345..Cx Insert, 6 Inserts, Insert Compatibility: 345R-13T5, 2.4803 in Shank Dia, Right Hand Cutting, 45 deg Cutting Angle, ANSI Code: 345-080C6-13M, ISO Code: 345-080C6-13M, Steel
- Features
| Axial concentric and radial coolant entry |
| Bolt and segment clamping adaptive interface |
| 10 bar coolant pressure |
| Differential cutting pitch |
| 40 - 60 deg insert screw clamping interface |
| 94.08 mm Dia maximum cutting |
| 70 mm overhang |
| 0 deg maximum ramping |
| 13700 r/min |
| 3 Nm torque |
| 20 life cycle state |
| Bolt and segment clamping adaptive interface |