Sandvik Coromant 5755974 CoroTurn® 107 1-Sided Turning Insert, VCMT 221-PF 4225, V-35 deg Diamond, VCMT-PF Insert, 4225
VCMT Turning Inserts
1249727
MFG #: 5755974
Sandvik Coromant
20.77000
/ ea
- ANSI Code: VCMT 221-PF 4225
- Catalog Number: 5755974
- Corner Radius: 0.0156 in
- Country of Origin: SE
- Finish: MTCVD Coated
- Gross Weight Per Pack: 0.0100 lb
- Hand of Insert: Neutral
- Hole Diameter: 0.1102 in
- Included Angle: 35 deg
- ISO Code: VCMT 11 03 04-PF 4225
- Length: 0.4358 in
- Relief Angle: 7 deg
- Series: CoroTurn® 107
- Thickness: 1/8 in
- Type: 1-Sided
- UPC 11: 69826235545
- Width: 0.396 mm
- Stock Status: NONSTOCK
- Brand: Sandvik Coromant
- Manufacturer: Sandvik Coromant
- Chipbreaker: PF
- Cutting Direction: Neutral
- For Use On: Cast Iron and Steel
- Inscribed Circle: 1/4 in
- Insert Size: VCMT-PF
- Insert Style: VCMT-PF
- Manufacturer's Grade: 4225
- Material: Carbide
- Material Grade: P
- Maximum Depth of Cut: 0.3 mm
- Rake: Positive
- Seat Size: 11
- Shape: V-35 deg Diamond
Sandvik Coromant Turning Insert, 1-Sided, Series: CoroTurn® 107, VCMT-PF Insert, V-35 deg Diamond, 0.3 mm Maximum Depth of Cut, 1/4 in Inscribed Circle, 1/8 in Thickness, 0.4358 in Length, PF Chipbreaker, 0.0156 in Corner Radius, 0.1102 in Hole Dia, Manufacturer's Grade: 4225, ANSI Code: VCMT 221-PF 4225, ISO Code: VCMT 11 03 04-PF 4225, 35 deg Included Angle, 7 deg Relief Angle, Neutral Hand, Carbide, MTCVD Coated, Material Grade: P
- Features
| 7 deg major clearance |
| E cutting edge condition |
| 2 cutting edges |
| 40 - 60 deg countersunk hole and non-flat surface clamping interface |
| 10.67 mm L effective cutting edge |
| M tolerance class |
| 0.05 - 0.2 mm/r cutting feed |
| 40 life cycle state |
| Sharp cutting edges and excellent chip control ensure a soft cutting action and low cutting forces, providing an excellent surface finish to the component |
| 7 deg clearance angle |
| Screw clamping ensures stability and unobstructed chip flow |
| Holders and insert geometries with conventional and CoroTurn HP design |
| For longitudinal turning and profiling |
| Positive rake |
| Screw clamp mount |