Sandvik Coromant 6868541 T-Max® P Negative Basic Shape Turning Insert, TNMG 433-KM 3225, T-Triangle, TNMG Insert, 3225, Carbide
TNMG Turning Inserts
1243559
MFG #: 6868541
Sandvik Coromant
20.08000
/ ea
- Alternate Catalog Number: TNMG 433-KM 3225
- ANSI Code: TNMG 433-KM 3225
- Catalog Number: 6868541
- Corner Radius: 0.0468 in
- Country of Origin: SE
- Finish: CVD-TiCN+Al2O3+TiN Coated
- Gross Weight Per Pack: 0.3400 lb
- Hole Diameter: 0.2029 in
- Included Angle: 60 °
- ISO Code: TNMG 22 04 12-KM 3225
- Item Group: 110
- Length: 0.866 in
- Relief Angle: 0 °
- Series: T-Max® P
- Thickness: 0.187 in
- Type: Basic Shape
- Stock Status: NONSTOCK
- Brand: Sandvik Coromant
- Manufacturer: Sandvik Coromant
- Chipbreaker: KM
- Cutting Direction: Neutral
- For Use On: Cast Iron
- Inscribed Circle: 1/2 in
- Insert Size: 433
- Insert Style: TNMG
- Manufacturer's Grade: 3225
- Material: Carbide
- Material Grade: K
- Maximum Depth of Cut: 0.315 in
- Rake: Negative
- Seat Size: 22
- Shape: Triangle
Sandvik Coromant Turning Insert, Negative Basic Shape, Series: T-Max® P, TNMG Insert, T-Triangle, 8 mm Maximum Depth of Cut, 1/2 in Inscribed Circle, 0.1874 in Thickness, 0.866 in Length, KM Chipbreaker, 0.0468 in Corner Radius, 0.2029 in Hole Dia, Manufacturer's Grade: 3225, ANSI Code: TNMG 433-KM 3225, ISO Code: TNMG 22 04 12-KM 3225, 60 deg Included Angle, 0 deg Relief Angle, Neutral Hand, Carbide, MTCVD Coated, Material Grade: K
- Features
| Minimizes notching |
| Prevents burrs |
| Reduces edge build-up |
| Stable machining with tough substrate |
| Low cutting resistance on fine surface |
| GK chipbreaker - good chip evacuation at wide range by breaker dot and wide chip pocket |
| PR1125 grade hard TiAlN base PVD coated super micrograin carbide, superior toughness and heat resistance |
| Finishing and light interrupted cutting of stainless steel |