Sandvik Coromant 5751888 CoroTurn® 107 1-Sided Turning Insert, TCMT 1.8(1.5)1-PM 4215, T-Triangle, TCMT-PM Insert, 4215
TCMT Turning Inserts
1233508
MFG #: 5751888
Sandvik Coromant
11.74000
/ ea
- ANSI Code: TCMT 1.8(1.5)1-PM 4215
- Catalog Number: 5751888
- Corner Radius: 0.0156 in
- Country of Origin: SE
- Finish: MTCVD Coated
- Gross Weight Per Pack: 1 lb
- Hand of Insert: Neutral
- Hole Diameter: 0.0984 in
- Included Angle: 60 deg
- ISO Code: TCMT 09 02 04-PM 4215
- Length: 0.3688 in
- Relief Angle: 7 deg
- Series: CoroTurn® 107
- Thickness: 0.0937 in
- Type: 1-Sided
- UPC 11: 69826240209
- Width: 9.37 mm
- Stock Status: NONSTOCK
- Brand: Sandvik Coromant
- Manufacturer: Sandvik Coromant
- Chipbreaker: PM
- Cutting Direction: Neutral
- For Use On: Cast Iron, Stainless Steel and Steel
- Inscribed Circle: 0.225 in
- Insert Size: T - Triangle
- Insert Style: TCMT-PM
- Manufacturer's Grade: 4215
- Material: Carbide
- Material Grade: P
- Maximum Depth of Cut: 0.6 mm
- Rake: Positive
- Seat Size: 09
- Shape: T-Triangle
Sandvik Coromant Turning Insert, 1-Sided, Series: CoroTurn® 107, TCMT-PM Insert, T-Triangle, 0.6 mm Maximum Depth of Cut, 0.225 in Inscribed Circle, 0.0937 in Thickness, 0.3688 in Length, PM Chipbreaker, 0.0156 in Corner Radius, 0.0984 in Hole Dia, Manufacturer's Grade: 4215, ANSI Code: TCMT 1.8(1.5)1-PM 4215, ISO Code: TCMT 09 02 04-PM 4215, 60 deg Included Angle, 7 deg Relief Angle, Neutral Hand, Carbide, MTCVD Coated, Material Grade: P
- Features
| 7 deg major clearance |
| E cutting edge condition |
| 3 cutting edges |
| 40 - 60 deg countersunk hole and non-flat surface clamping interface |
| 8.97 mm L effective cutting edge |
| M tolerance class |
| 0.06 - 0.17 mm/r cutting feed |
| 30 life cycle state |
| Sharp cutting edges and excellent chip control ensure a soft cutting action and low cutting forces, providing an excellent surface finish to the component |
| 7 deg clearance angle |
| Screw clamping ensures stability and unobstructed chip flow |
| Holders and insert geometries with conventional and CoroTurn HP design |
| For longitudinal turning and profiling |
| Positive rake |