Valenite Tiger-tec® Silver 7054063 Positive Single Sided Turning Insert, SCGT3(2,5)1-FM2 WSM20S ANSI, Square, Carbide
SCGT Turning Inserts
PDW~12584690
MFG #: SCGT3(2.5)1-FM2WSM20S
Walter (Valentine)
23.20000
/ ea
- ANSI Code: SCGT3(2,5)1-FM2 WSM20S
- Catalog Number: SCGT3(2.5)1-FM2WSM20S
- Corner Radius: 0.4 mm
- Finish: PVD-TiAlN+Al2O3 Coated
- Gross Weight Per Pack: 1 lb
- Hole Diameter: 0.173 in
- Included Angle: 90 °
- ISO Code: SCGT09T304-FM2 WSM20S
- Length: 9.525 mm
- Relief Angle: 7 °
- Series: Tiger-tec® Silver
- Sub Brand: Tiger-tec®
- Thickness: 3.97 mm
- Type: 1-Sided
- Width: 9.525 mm
- Stock Status: NONSTOCK
- Brand: Walter (Valentine)
- Manufacturer: Walter
- Chipbreaker: FM2
- Cutting Direction: Neutral
- For Use On: High Temperature Alloys, Stainless Steel and Titanium Alloys
- Inscribed Circle: 9.525 mm
- Insert Size: 3(2,5)1
- Insert Style: SCGT
- Manufacturer's Grade: WSM20S
- Material: Carbide
- Material Grade: M, S
- Maximum Depth of Cut: 2.5 mm
- Rake: Positive
- Seat Size: 09
- Shape: Square
With Tiger-tec® Silver, Walter is offering a world first in coating technology for indexable inserts. The special aluminium oxide layer with optimized microstructure reduces wear during turning, milling and drilling operations and increases toughness and temperature resistance for significantly higher cutting data.
- Features
| Improved coating adhesion prevents chipping and provides stable machining |
| Micro TiCN coating provides excellent wear resistance |
| Hard surface layer - provides advanced wear resistance |
| Strong intra coating adhesion - higher adhesion between each layer with improved crystal structure |
| Micro TiCN layer - higher coating hardness is possible due to a micro TiCN crystal structure, resulting in increased wear resistance |
| ZS chipbreaker - standard chipbreaker for light interrupted to interrupted machining of cast iron |
| High stability |
| CA315 grade excellent performance for machining gray and nodular cast iron by optimizing the total coating layer thickness |
| First choice for continuous to interrupted machining of nodular cast iron |