Sandvik Coromant 5965426 CoroTurn® 107 1-Sided Turning Insert, DCGW3(2.5)2T0320F 7525, D-55 deg Diamond, 7525, Carbide
DCGW Turning Inserts
1228775
MFG #: 5965426
Sandvik Coromant
91.60000
/ ea
- Alternate Catalog Number: DCGW3(2.5)2T0320F 7525
- ANSI Code: DCGW3(2.5)2T0320F 7525
- Catalog Number: 5965426
- Corner Radius: 0.0312 in
- Country of Origin: US
- Finish: PVD Coated
- Gross Weight Per Pack: 0.0100 lb
- Hand of Insert: Neutral
- Hole Diameter: 0.1732 in
- Included Angle: 55 deg
- ISO Code: DCGW11T308T01020F 7525
- Item Group: 620
- Length: 0.4577 in
- Relief Angle: 7 deg LB
- Series: CoroTurn® 107
- Thickness: 0.1562 in
- Type: 1-Sided
- UPC 11: 69826254361
- Width: 0.4 mm
- Stock Status: NONSTOCK
- Brand: Sandvik Coromant
- Manufacturer: Sandvik Coromant
- Chipbreaker: PVD
- Cutting Direction: Neutral
- For Use On: Hardened Steel and Cast Iron
- Inscribed Circle: 3/8 in
- Insert Size: H, K
- Insert Style: DCGW..T..F
- Manufacturer's Grade: 7525
- Material: Carbide
- Material Grade: H/K
- Maximum Depth of Cut: 0.4 mm
- Rake: Positive
- Seat Size: 11
- Shape: D-55 deg Diamond
Sandvik Coromant Turning Insert, 1-Sided, Series: CoroTurn® 107, DCGW..T..F Insert, D-55 deg Diamond, 0.4 mm Maximum Depth of Cut, 3/8 in Inscribed Circle, 0.1562 in Thickness, 0.4577 in Length, 0.0312 in Corner Radius, 0.1732 in Hole Dia, Manufacturer's Grade: 7525, ANSI Code: DCGW3(2.5)2T0320F 7525, ISO Code: DCGW11T308T01020F 7525, 55 deg Included Angle, 7 deg Relief Angle, Neutral Hand, Carbide, PVD Coated, Material Grade: H/K
- Features
7 deg major clearance |
0.1 mm W face land |
T cutting edge condition |
2 cutting edges |
40 - 60 deg countersunk hole and flat surface clamping interface |
20 deg face land |
3.1 mm L effective cutting edge |
G tolerance class |
0.05 - 0.6 mm/r cutting feed |
20 life cycle state |
Sharp cutting edges and excellent chip control ensure a soft cutting action and low cutting forces, providing an excellent surface finish to the component |
7 deg clearance angle |
Screw clamping ensures stability and unobstructed chip flow |
Holders and insert geometries with conventional and CoroTurn HP design |
For longitudinal turning and profiling |
Positive rake |