Sandvik Coromant 6868463 T-Max® P Negative Basic Shape Turning Insert, CNMG 543-WMX 3225, C-80 deg Diamond, CNMG Insert
CNMG Turning Inserts
1238018
MFG #: 6868463
Sandvik Coromant
30.03000
/ ea
- Alternate Catalog Number: CNMG 543-WMX 3225
- ANSI Code: CNMG 543-WMX 3225
- Catalog Number: 6868463
- Corner Radius: 0.047 in
- Country of Origin: SE
- Finish: CVD-TiCN+Al2O3+TiN Coated
- Gross Weight Per Pack: 0.4900 lb
- Hole Diameter: 1/4 in
- Included Angle: 80 °
- ISO Code: CNMG 16 06 12-WMX 3225
- Item Group: 110
- Relief Angle: 0 °
- Series: T-Max® P
- Thickness: 1/4 in
- Stock Status: NONSTOCK
- Brand: Sandvik Coromant
- Manufacturer: Sandvik Coromant
- Chipbreaker: WMX
- Cutting Direction: Neutral
- For Use On: Cast Iron
- Inscribed Circle: 5/8 in
- Insert Size: 543
- Insert Style: CNMG
- Manufacturer's Grade: 3225
- Material: Carbide
- Material Grade: K
- Maximum Depth of Cut: 0.236 in
- Rake: Negative
- Seat Size: 16
- Shape: Rhombic
Sandvik Coromant Turning Insert, Negative Basic Shape, Series: T-Max® P, CNMG Insert, C-80 deg Diamond, 6 mm Maximum Depth of Cut, 5/8 in Inscribed Circle, 1/4 in Thickness, 0.6346 in Length, WMX Chipbreaker, 0.0468 in Corner Radius, 1/4 in Hole Dia, Manufacturer's Grade: 3225, ANSI Code: CNMG 543-WMX 3225, ISO Code: CNMG 16 06 12-WMX 3225, 80 deg Included Angle, 0 deg Relief Angle, Neutral Hand, Carbide, MTCVD Coated, Material Grade: K
- Features
| Longer tool life - excellent wear and fracture resistance |
| Prevents layer peeling - strong intra coating adhesion |
| Higher adhesion between each layer with improved crystal structure |
| Control chipping - higher layer strength |
| GK chipbreaker - good chip evacuation at wide range by breaker dot and wide chip pocket |
| CA510 grade special substrate with thermal deformation resistance along with a thick and tough film coating for wear resistance |
| High speed and high efficiency steel machining |
| Wiper technology for high feed machining |
| Improved machining economy |
| Excellent surface finish |
| Eliminate expensive grinding operations |
| Undisturbed production |
| Less need for supervision |
| 0.2 - 0.75 mm/r cutting feed |