Sandvik Coromant 6868426 T-Max® P Negative Basic Shape Turning Insert, CNMG 432-WF 3225, C-80 deg Diamond, CNMG Insert
CNMG Turning Inserts
1238017
MFG #: 6868426
Sandvik Coromant
19.06000
/ ea
- Alternate Catalog Number: CNMG 432-WF 3225
- ANSI Code: CNMG 432-WF 3225
- Catalog Number: 6868426
- Corner Radius: 0.0312 in
- Country of Origin: IN
- Finish: CVD-TiCN+Al2O3+TiN Coated
- Gross Weight Per Pack: 0.2200 lb
- Hole Diameter: 0.2029 in
- Included Angle: 80 °
- ISO Code: CNMG 12 04 08-WF 3225
- Item Group: 110
- Relief Angle: 0 °
- Series: T-Max® P
- Thickness: 0.187 in
- Stock Status: NONSTOCK
- Brand: Sandvik Coromant
- Manufacturer: Sandvik Coromant
- Chipbreaker: WF
- Cutting Direction: Neutral
- For Use On: Cast Iron
- Inscribed Circle: 1/2 in
- Insert Size: 432
- Insert Style: CNMG
- Manufacturer's Grade: 3225
- Material: Carbide
- Material Grade: K
- Maximum Depth of Cut: 0.157 in
- Rake: Negative
- Seat Size: 12
- Shape: Rhombic
Sandvik Coromant Turning Insert, Negative Basic Shape, Series: T-Max® P, CNMG Insert, C-80 deg Diamond, 4 mm Maximum Depth of Cut, 1/2 in Inscribed Circle, 0.1874 in Thickness, 0.5077 in Length, WF Chipbreaker, 0.0312 in Corner Radius, 0.2029 in Hole Dia, Manufacturer's Grade: 3225, ANSI Code: CNMG 432-WF 3225, ISO Code: CNMG 12 04 08-WF 3225, 80 deg Included Angle, 0 deg Relief Angle, Neutral Hand, Carbide, MTCVD Coated, Material Grade: K
- Features
| Longer tool life - excellent wear and fracture resistance |
| Prevents layer peeling - strong intra coating adhesion |
| Higher adhesion between each layer with improved crystal structure |
| Control chipping - higher layer strength |
| GK chipbreaker - good chip evacuation at wide range by breaker dot and wide chip pocket |
| CA510 grade special substrate with thermal deformation resistance along with a thick and tough film coating for wear resistance |
| High speed and high efficiency steel machining |
| Wiper technology for high feed machining |
| Improved machining economy |
| Excellent surface finish |
| Eliminate expensive grinding operations |
| Undisturbed production |
| Less need for supervision |
| 0.1 - 0.5 mm/r cutting feed |