Sandvik Coromant 6709532 CoroTurn® 107 Basic Shape Positive Turning Insert, CCMT 3(2.5)2-PM 4305, C-80 deg Diamond
CCMT Turning Inserts
1237299
MFG #: 6709532
Sandvik Coromant
14.89000
/ ea
- Alternate Catalog Number: CCMT 3(2.5)2-PM 4305
- ANSI Code: CCMT 3(2.5)2-PM 4305
- Catalog Number: 6709532
- Corner Radius: 0.0312 in
- Country of Origin: SE
- Finish: CVD-TiCN+Al2O3+TiN Coated
- Gross Weight Per Pack: 0.1000 lb
- Hole Diameter: 0.1732 in
- Included Angle: 80 °
- ISO Code: CCMT 09 T3 08-PM 4305
- Item Group: 122
- Relief Angle: 7 °
- Series: CoroTurn® 107
- Thickness: 0.1562 in
- Stock Status: NONSTOCK
- Brand: Sandvik Coromant
- Manufacturer: Sandvik Coromant
- Chipbreaker: PM
- Cutting Direction: Neutral
- For Use On: Cast Iron and Steel
- Inscribed Circle: 3/8 in
- Insert Size: 3(2.5)2
- Insert Style: CCMT
- Manufacturer's Grade: 4305
- Material: Carbide
- Material Grade: K, P
- Maximum Depth of Cut: 3 mm
- Rake: Positive
- Seat Size: 09
- Shape: Diamond
Sandvik Coromant Turning Insert, Basic Shape Positive, Series: CoroTurn® 107, CCMT Insert, C-80 deg Diamond, 3 mm Maximum Depth of Cut, 3/8 in Inscribed Circle, 0.1562 in Thickness, 0.3807 in Length, PM Chipbreaker, 0.0312 in Corner Radius, 0.1732 in Hole Dia, Manufacturer's Grade: 4305, ANSI Code: CCMT 3(2.5)2-PM 4305, ISO Code: CCMT 09 T3 08-PM 4305, 80 deg Included Angle, 7 deg Relief Angle, Neutral Hand, Carbide, MTCVD Coated, Material Grade: K/P
- Features
| T9325 grade functionally gradient substrate |
| Relatively low content of cobalt binder phase |
| Thick MT-CVD coating |
| Highly versatile material with very good operational reliability |
| Special surface finish for coating |
| Medium and higher cutting speed |
| Continuous and interrupted cut |
| Unfavorable cutting conditions, continuous and/or interrupted cuts |
| Cutting geometry suitable for grooving and axial turning |
| Suitable for turning, with an indexing accuracy to ISO tolerance class-G and chipbreakers on one side only |
| FF2 chipbreaker - positive geometry with low cutting resistance |
| Improved cutting edge stability |
| Straight cutting edge |
| Very good chip control at low feed and depth of cut |
| High quality of surface finish |
| Increased performance and tool life in combination with the upgrade grades |
| Especially for small and slender components |