Sandvik Coromant 5724825 CoroTurn® 107 1-Sided Turning Insert, CCMT 431-WM 4225, C-80 deg Diamond, CCMT-WM Insert, 4225
CCMT Turning Inserts
1231943
MFG #: 5724825
Sandvik Coromant
23.10000
/ ea
- ANSI Code: CCMT 431-WM 4225
- Catalog Number: 5724825
- Corner Radius: 0.0156 in
- Country of Origin: SE
- Finish: MTCVD Coated
- Gross Weight Per Pack: 0.0200 lb
- Hand of Insert: Neutral
- Hole Diameter: 0.2165 in
- Included Angle: 80 deg
- ISO Code: CCMT 12 04 04-WM 4225
- Length: 0.5077 in
- Relief Angle: 7 deg LB
- Series: CoroTurn® 107
- Thickness: 0.1874 in
- Type: 1-Sided
- UPC 11: 69826233058
- Width: 4225
- Stock Status: NONSTOCK
- Brand: Sandvik Coromant
- Manufacturer: Sandvik Coromant
- Chipbreaker: WM
- Cutting Direction: Neutral
- For Use On: Steel
- Inscribed Circle: 1/2 in
- Insert Size: Single Sided
- Insert Style: CCMT-WM
- Manufacturer's Grade: 4225
- Material: Carbide
- Material Grade: P
- Maximum Depth of Cut: 2 mm
- Rake: Positive
- Seat Size: 12
- Shape: C-80 deg Diamond
Sandvik Coromant Turning Insert, 1-Sided, Series: CoroTurn® 107, CCMT-WM Insert, C-80 deg Diamond, 2 mm Maximum Depth of Cut, 1/2 in Inscribed Circle, 0.1874 in Thickness, 0.5077 in Length, WM Chipbreaker, 0.0156 in Corner Radius, 0.2165 in Hole Dia, Manufacturer's Grade: 4225, ANSI Code: CCMT 431-WM 4225, ISO Code: CCMT 12 04 04-WM 4225, 80 deg Included Angle, 7 deg Relief Angle, Neutral Hand, Carbide, MTCVD Coated, Material Grade: P
- Features
| 7 deg major clearance |
| E cutting edge condition |
| 2 cutting edges |
| 40 - 60 deg countersunk hole and non-flat surface clamping interface |
| 95 deg cutting edge |
| 12.49 mm L effective cutting edge |
| M tolerance class |
| Wiper edge technology |
| 0.15 - 0.4 mm/r cutting feed |
| 40 life cycle state |
| Sharp cutting edges and excellent chip control ensure a soft cutting action and low cutting forces, providing an excellent surface finish to the component |
| 7 deg clearance angle |
| Screw clamping ensures stability and unobstructed chip flow |
| Holders and insert geometries with conventional and CoroTurn HP design |
| For longitudinal turning and profiling |
| Positive rake |
| Screw clamp mount |