Sandvik Coromant 5724012 CoroTurn® 107 1-Sided Turning Insert, CCMT 2(1.5)1-MM 1005, C-80 deg Diamond, CCMT-MM Insert, 1005
CCMT Turning Inserts
1229547
MFG #: 5724012
Sandvik Coromant
10.80000
/ ea
- ANSI Code: CCMT 2(1.5)1-MM 1005
- Catalog Number: 5724012
- Corner Radius: 0.0156 in
- Country of Origin: SE
- Finish: PVD Coated
- Gross Weight Per Pack: 1 lb
- Hand of Insert: Neutral
- Hole Diameter: 0.1102 in
- Included Angle: 80 deg
- ISO Code: CCMT 06 02 04-MM 1005
- Length: 0.2538 in
- Relief Angle: 1005
- Series: CoroTurn® 107
- Thickness: 0.0937 in
- Type: 1-Sided
- UPC 11: 69826212811
- Width: Single Sided
- Stock Status: NONSTOCK
- Brand: Sandvik Coromant
- Manufacturer: Sandvik Coromant
- Chipbreaker: MM
- Cutting Direction: Neutral
- For Use On: Stainless Steel and Heat Resistant Super Alloys and Titanium
- Inscribed Circle: 1/4 in
- Insert Size: 80 deg
- Insert Style: CCMT-MM
- Manufacturer's Grade: 1005
- Material: Carbide
- Material Grade: S
- Maximum Depth of Cut: 0.64 mm
- Rake: Positive
- Seat Size: 06
- Shape: C-80 deg Diamond
Sandvik Coromant Turning Insert, 1-Sided, Series: CoroTurn® 107, CCMT-MM Insert, C-80 deg Diamond, 0.64 mm Maximum Depth of Cut, 1/4 in Inscribed Circle, 0.0937 in Thickness, 0.2538 in Length, MM Chipbreaker, 0.0156 in Corner Radius, 0.1102 in Hole Dia, Manufacturer's Grade: 1005, ANSI Code: CCMT 2(1.5)1-MM 1005, ISO Code: CCMT 06 02 04-MM 1005, 80 deg Included Angle, Neutral Hand, Carbide, PVD Coated, Material Grade: S
- Features
| 7 deg major clearance |
| E cutting edge condition |
| 2 cutting edges |
| 40 - 60 deg countersunk hole and non-flat surface clamping interface |
| 6.048 mm L effective cutting edge |
| M tolerance class |
| 0.06 - 0.12 mm/r cutting feed |
| 30 life cycle state |
| Sharp cutting edges and excellent chip control ensure a soft cutting action and low cutting forces, providing an excellent surface finish to the component |
| 7 deg clearance angle |
| Screw clamping ensures stability and unobstructed chip flow |
| Holders and insert geometries with conventional and CoroTurn HP design |
| For longitudinal turning and profiling |