Sandvik Coromant 5724461 CoroDrill® 880 Insert Drill, 0.687 in Drill, 1 in Shank, 6.3707 in AOL, 3.435 in D Maximum Drill, 5
Indexable Drills
302519
MFG #: 5724461
Sandvik Coromant
882.94000
/ ea
- Alternate Catalog Number: A880-D0687LX25-05
- Catalog Number: 5724461
- Country of Origin: US
- Drill Depth by Diameter Ratio: 5
- Gage Insert: CoroDrill® 880
- Gross Weight Per Pack: 0.6600 lb
- Item Group: 465
- Number of Drill Inserts: 25.4 mm
- Overall Length: 6.3707 in
- Series: CoroDrill® 880
- Type: 5
- UPC 11: 69826234635
- UPC 12: 69826234635
- Stock Status: NONSTOCK
- Brand: Sandvik Coromant
- Manufacturer: Sandvik Coromant
- Diameter: 87.249 mm
- Drill Size: 0.687 in
- Flute Length: 3.435 in
- Insert Compatibility: 880-030305H-C-GM (MIIDM) and 880-0303W05H-P-GM (MIIDM)
- Maximum Drill Depth: 3.435 in
- Shank Diameter: 1 in
- Shank Length: 25.4 mm
- Shank Type: Cylinder
Sandvik Coromant Insert Drill, Series: CoroDrill® 880, 0.687 in Drill, 1 in Shank Dia, Cylinder Shank, 3.435 in Maximum Drill Depth, 6.3707 in Overall Length, 5 Drill Depth by Dia Ratio, Insert Compatibility: 880-030305H-C-GM (MIIDM) and 880-0303W05H-P-GM (MIIDM), 3.435 in Flute Length
- Features
| 105.5058 mm L functional |
| 25.4 mm Dia body |
| 56 mm L clamping |
| 0.3106 mm L point |
| 13500 r/min |
| 0 - 0.4 mm achievable hole tolerance |
| Axial concentric coolant entry |
| Axial inclined coolant exit |
| 10 bar coolant |
| 40 - 60 deg insert screw clamping |
| EFW feed direction |
| SSK flute |
| 13 deg right hand helix flute |
| 5 deg rake orthogonal |
| 23.4 mm H shank |
| 0 deg inclination, 2 flutes |
| 88 deg cutting edge |
| 100.79868 mm L chip flute |
| 20 life cycle state |
| 90.7288 mm L steel body |